ATmega8U2/16U2/32U2
6. AVR CPU Core
6.1
Introduction
This section discusses the AVR core architecture in general. The main function of the CPU core
is to ensure correct program execution. The CPU must therefore be able to access memories,
perform calculations, control peripherals, and handle interrupts.
6.2
Architectural Overview
Figure 6-1. Block Diagram of the AVR Architecture
Data Bus 8-bit
Program
Counter
Status
and Control
Flash
Program
Memory
Interrupt
Unit
32 x 8
General
Purpose
Registrers
Instruction
Register
SPI
Unit
Instruction
Decoder
Watchdog
Timer
ALU
Analog
Comparator
Control Lines
I/O Module1
I/O Module 2
I/O Module n
Data
SRAM
EEPROM
I/O Lines
In order to maximize performance and parallelism, the AVR uses a Harvard architecture – with
separate memories and buses for program and data. Instructions in the program memory are
executed with a single level pipelining. While one instruction is being executed, the next instruc-
tion is pre-fetched from the program memory. This concept enables instructions to be executed
in every clock cycle. The program memory is In-System Reprogrammable Flash memory.
7
7799D–AVR–11/10
ATMEL [ ATMEL ]
