ATmega8U2/16U2/32U2
This register contains the number of received byte into the current bank of the selected end-
point. The content of this register is decremented after each write access to the endpoint data
register.
21.18.19 UEINT – USB Endpoint Number interrupt Register
Bit
(0xF4)
7
6
5
4
3
2
1
0
-
-
-
EPINT4:0
UEINT
Read/Write
Initial Value
R
0
R
0
R
0
R
0
R
0
R
0
R
0
R
0
R
• Bits 7:5 – Res: Reserved
The value read from these bits is always 0. Do not set these bits.
• Bits 4:0 – EPINT[4:0]: Endpoint Interrupts Bits
These flags are updated by the USB controller when a USB endpoint interrupt occurs (at least
one bit in UEINTX set). Each bit in this field indicates which endpoint number has generated a
USB endpoint interrupt request. Each one of these bits are independently cleared by hardware
when their respective interrupt source is served.
222
7799D–AVR–11/10
ATMEL [ ATMEL ]
