欢迎访问ic37.com |
会员登录 免费注册
发布采购

90USB82-16MU 参数 Datasheet PDF下载

90USB82-16MU图片预览
型号: 90USB82-16MU
PDF下载: 下载PDF文件 查看货源
内容描述: 8位微控制器具有ISP功能的Flash 8 / 16K字节 [8-bit Microcontroller with 8/16K Bytes of ISP Flash]
分类和应用: 微控制器和处理器外围集成电路异步传输模式ATM时钟
文件页数/大小: 306 页 / 2299 K
品牌: ATMEL [ ATMEL ]
 浏览型号90USB82-16MU的Datasheet PDF文件第128页浏览型号90USB82-16MU的Datasheet PDF文件第129页浏览型号90USB82-16MU的Datasheet PDF文件第130页浏览型号90USB82-16MU的Datasheet PDF文件第131页浏览型号90USB82-16MU的Datasheet PDF文件第133页浏览型号90USB82-16MU的Datasheet PDF文件第134页浏览型号90USB82-16MU的Datasheet PDF文件第135页浏览型号90USB82-16MU的Datasheet PDF文件第136页  
15.10.2 Timer/Counter1 Control Register B – TCCR1B  
Bit  
7
6
5
R
0
4
3
2
1
0
ICNC1  
R/W  
0
ICES1  
R/W  
0
WGM13  
R/W  
0
WGM12  
R/W  
0
CS12  
R/W  
0
CS11  
R/W  
0
CS10  
R/W  
0
TCCR1B  
Read/Write  
Initial Value  
• Bit 7 – ICNCn: Input Capture Noise Canceler  
Setting this bit (to one) activates the Input Capture Noise Canceler. When the Noise Canceler is  
activated, the input from the Input Capture Pin (ICPn) is filtered. The filter function requires four  
successive equal valued samples of the ICPn pin for changing its output. The input capture is  
therefore delayed by four Oscillator cycles when the noise canceler is enabled.  
• Bit 6 – ICESn: Input Capture Edge Select  
This bit selects which edge on the Input Capture Pin (ICPn) that is used to trigger a capture  
event. When the ICESn bit is written to zero, a falling (negative) edge is used as trigger, and  
when the ICESn bit is written to one, a rising (positive) edge will trigger the capture.  
When a capture is triggered according to the ICESn setting, the counter value is copied into the  
Input Capture Register (ICRn). The event will also set the Input Capture Flag (ICFn), and this  
can be used to cause an Input Capture Interrupt, if this interrupt is enabled.  
When the ICRn is used as TOP value (see description of the WGMn3:0 bits located in the  
TCCRnA and the TCCRnB Register), the ICPn is disconnected and consequently the input cap-  
ture function is disabled.  
• Bit 5 – Reserved Bit  
This bit is reserved for future use. For ensuring compatibility with future devices, this bit must be  
written to zero when TCCRnB is written.  
• Bit 4:3 – WGMn3:2: Waveform Generation Mode  
See TCCRnA Register description.  
• Bit 2:0 – CSn2:0: Clock Select  
The three clock select bits select the clock source to be used by the Timer/Counter, see Figure  
14-1 and Figure 14-2.  
Table 15-5. Clock Select Bit Description  
CSn2  
CSn1  
CSn0  
Description  
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
No clock source. (Timer/Counter stopped)  
clkI/O/1 (No prescaling  
clkI/O/8 (From prescaler)  
clkI/O/64 (From prescaler)  
clkI/O/256 (From prescaler)  
clkI/O/1024 (From prescaler)  
External clock source on Tn pin. Clock on falling edge  
External clock source on Tn pin. Clock on rising edge  
132  
AT90USB82/162  
7707D–AVR–07/08  
 复制成功!