AMS73CAG01808RA
24. The tIS(base) AC150 specifications are adjusted from the tIS(base) specification by adding an additional 100 ps of
derating to accommodate for the lower alternate threshold of 150 mV and another 25 ps to account for the earlier
reference point [(175 mv - 150 mV) / 1 V/ns].
25. Pulse width of a input signal is defined as the width between the first crossing of VREF(DC) and the consecutive
crossing of VREF(DC).
26. tDQSL describes the instantaneous differential input low pulse width on DQS - DQS, as measured from one falling
edge to the next consecutive rising edge.
27. tDQSH describes the instantaneous differential input high pulse width on DQS - DQS, as measured from one rising
edge to the next consecutive falling edge.
28. tDQSH,act + tDQSL,act = 1 tCK,act ; with tXYZ,act being the actual measured value of the respective timing
parameter in the application.
29. tDSH,act + tDSS,act = 1 tCK,act ; with tXYZ,act being the actual measured value of the respective timing parameter
in the application.
30. tCH(abs) is the absolute instantaneous clock high pulse width, as measured from one rising edge to the following
falling edge.
31. tCL(abs) is the absolute instantaneous clock low pulse width, as measured from one falling edge to the following
rising edge.
32. n = from 13 cycles to 50 cycles. This row defines 38 parameters.
AMS73CAG01808RA Rev. 1.0 December 2010
29
AMS [ Advanced Monolithic Systems Ltd ]
