ABSOLUTE MAXIMUM RATINGS
OPERATING RANGES
Storage Temperature . . . . . . . . . . . .–65°C to +125°C
Ambient Temperature Under Bias . . –65°C to +110°C
Commercial (C) Devices
Ambient Temperature (TA)
Operating in Free Air. . . . . . . . . . . . . . . .0°C to +70°C
Supply Voltage VCC with Respect
to GND . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +4.6 V
Supply Voltage (VCC) . . . . . . . . . . . . +3.0 V to +3.6 V
CPU Voltage (VCC_CPU) (33 & 66 MHz) +2.7 V to +3.6 V
CPU Voltage (VCC_CPU) (100 MHz) +3.3 V to +3.6 V
Voltage on 5-V-Tolerant Pins . . –0.5 V to (VCC+2.6 V)
Voltage on Other Pins . . . . . . . –0.5 V to (VCC+0.5 V)
Stresses above those listed may cause permanent device
failure. Functionality at or above these limits is not implied.
Exposure to Absolute Maximum Ratings for extended
periods may affect device reliability.
Operating ranges define those limits between which the
functionality of the device is guaranteed.
DC CHARACTERISTICS OVER COMMERCIAL AND INDUSTRIAL OPERATING RANGES
1
(BALL GRID ARRAY (BGA), 33 MHZ, 3.3 V)
Symbol
Parameter Description
Min
Typ
Max
100
879
Unit
MHz
mW
µW
fOSC
Frequency of Operation (internal CPU clock)
Supply Power—CPU clock = 33 MHz (VCC_CPU=3.3 V)
0
PCC
703
2
PCCSS
Suspend Power at 3.3 V and 25°C—CPU idle, all internal
264
643.5
clocks stopped except 32.768 kHz
(80 µA)
(195 µA)
Suspend Power at 3.3 V and 70°C—CPU idle, all internal
clocks stopped except 32.768 kHz
726
(220 µA)
1950.5
(585 µA)
µW
POFF
RTC Power Only at 3.3 V
16
33
µW
V
VOH(CMOS)
VOL(CMOS)
VIH(CMOS)
VIH(5-VTOL)
VIL(CMOS)
ILI
Output High Voltage IOH(CMOS) = –0.5 mA
Output Low Voltage IOL(CMOS) = +0.5 mA
Input High Voltage
VCC–0.45
0.45
VCC+0.3
VCC+2.5
+0.8
V
2.03
2.03
–0.3
V
Input High Voltage (5-V tolerant inputs)
Input Low Voltage
V
V
Input Leakage Current (0.1 V ≤ VOUT ≤ VCC
)
±10
µA
(All pins except those with internal pullup/pulldown resistors)
IIH
IIL
Input Leakage Current (VIH = VCC – 0.1 V)
(All pins with internal pulldown resistors)
60
µA
µA
µA
mV
Input Leakage Current (VIL = 0.1 V)
(Pins with internal pullup resistors)
–60
±15
100
ILO
Output Leakage Current (0.1 V ≤ VOUT ≤ VCC)
(All pins except those with internal pullup/pulldown resistors)
AVCCRP–P
Analog VCC ripple peak to peak
Notes:
1. VCCIO = 3.0 V–3.6 V. For 33 and 66 MHz, TCASE = 0°C to +95°C (commercial). TCASE = –40°C to +95°C (industrial).
For 100 MHz, TCASE = 0°C to +85°C (commercial). Current out of a pin is given as a negative value.
2. In Suspend and Critical Suspend, the power state is the same. The PLLs are off, the LCD is disabled, and the CPU and all logic
are in the lowest power state. The power management unit is active.
3. VCC at 3.3 V.
86
Élan™SC400 and ÉlanSC410 Microcontrollers Data Sheet