欢迎访问ic37.com |
会员登录 免费注册
发布采购

QT2032 参数 Datasheet PDF下载

QT2032图片预览
型号: QT2032
PDF下载: 下载PDF文件 查看货源
内容描述: [10 Gb/s Serial-to-XAUI PHY ICs for Ethernet and Fibre Channel LAN/ SAN/WAN Applications (CDR)]
分类和应用: 局域网
文件页数/大小: 220 页 / 2383 K
品牌: AMCC [ APPLIED MICRO CIRCUITS CORPORATION ]
 浏览型号QT2032的Datasheet PDF文件第42页浏览型号QT2032的Datasheet PDF文件第43页浏览型号QT2032的Datasheet PDF文件第44页浏览型号QT2032的Datasheet PDF文件第45页浏览型号QT2032的Datasheet PDF文件第47页浏览型号QT2032的Datasheet PDF文件第48页浏览型号QT2032的Datasheet PDF文件第49页浏览型号QT2032的Datasheet PDF文件第50页  
QT2022/32 - Data Sheet: DS3051  
A 4-bit counter is implemented, which conveys the count of interleaved bit blocks that have been detected in error  
by the Path BIP-8 code (B3). This count has nine legal values, namely 0 to 8 errors. The counter is passed to the  
TX WIS for composing the G1 octet. The WIS receiver monitors G1 to count the number of remote B3 errors. The  
near-end 16-bit counter value is stored in 2.59 and the far-end 16-bit counter value is stored in 2.37.  
7.2.9 Receive Payload Mapping  
Figure 13: Receive Bit Relabelling Function  
Data-units to WIS Service Interface  
Next Octet Processed  
First Octet Processed  
rx_data-unit<15:0>  
LSB  
0
1
2
2
3
4 5  
6
7
8
1
9 10 11 12 13 14 15  
MSB  
LSB  
SPE octets  
MSB  
1
3
4
5
6
7
8
2
3
4 5  
6
7
8
Higher-numbered (Odd) Octet in SPE  
Last  
lower-numbered (Even) Octet in SPE  
First  
Reception Order  
Data from frame reception process  
The Receive payload mapping maps the octets in the SPE payload capacity to a continuous stream of data-units  
that are supplied to the PCS via the rx_data-unit<15:0> parameter of the WIS_UNITDATA.indicate primitive of the  
WIS Service Interface. Within each data-unit, rx_data-unit<7:0> is mapped to a lower-numbered (even) octet in the  
SPE capacity, and rx_data-unit<15:8> is mapped to the next high-numbered (odd) octet.  
A bit relabelling function is performed to map the bit numbering and ordering conventions followed by the Receive  
process (which follows the bit numbering and ordering conventions of SONET/SDH to those required by the WIS  
Service Interface. The relabelling function is performed as shown in Figure 13. Bit 1 of the lower-numbered (even)  
octet within the received SONET SPE is renumbered as bit 0 of rx_data-unit<15:0> at the WIS Service Interface,  
bit 8 of the high-numbered octet within the SONET SPE is renumbered as bit 15 of rx_data-unit<15:0>, and the  
rest of the bits are renumbered in corresponding sequence.  
7.2.10 Test Pattern Checker  
The QT2032 provides WIS compliant test pattern checking features. Please refer to Section 11.5, “WIS Test Fea-  
tures (QT2032 only),” on page 102 for details.  
7.3 Extended WIS Features  
The QT2032 integrates a series of features common for SONET framer that are not supported by the WIS Clause.  
46  
AppliedMicro - Confidential & Proprietary  
Revision 5.11  
 复制成功!