欢迎访问ic37.com |
会员登录 免费注册
发布采购

EPF6016TC144-2 参数 Datasheet PDF下载

EPF6016TC144-2图片预览
型号: EPF6016TC144-2
PDF下载: 下载PDF文件 查看货源
内容描述: [Loadable PLD, CMOS, PQFP144, TQFP-144]
分类和应用: 时钟LTE输入元件可编程逻辑
文件页数/大小: 52 页 / 374 K
品牌: ALTERA [ ALTERA CORPORATION ]
 浏览型号EPF6016TC144-2的Datasheet PDF文件第23页浏览型号EPF6016TC144-2的Datasheet PDF文件第24页浏览型号EPF6016TC144-2的Datasheet PDF文件第25页浏览型号EPF6016TC144-2的Datasheet PDF文件第26页浏览型号EPF6016TC144-2的Datasheet PDF文件第28页浏览型号EPF6016TC144-2的Datasheet PDF文件第29页浏览型号EPF6016TC144-2的Datasheet PDF文件第30页浏览型号EPF6016TC144-2的Datasheet PDF文件第31页  
FLEX 6000 Programmable Logic Device Family Data Sheet  
MultiVolt I/O Interface  
The FLEX 6000 device architecture supports the MultiVolt I/O interface  
feature, which allows FLEX 6000 devices to interface with systems of  
differing supply voltages. The EPF6016 device can be set for 3.3-V or 5.0-V  
I/O pin operation. This device has one set of VCC pins for internal  
operation and input buffers (VCCINT), and another set for output drivers  
(VCCIO).  
The VCCINT pins on 5.0-V FLEX 6000 devices must always be connected  
to a 5.0-V power supply. With a 5.0-V VCCINT level, input voltages are at  
TTL levels and are therefore compatible with 3.3-V and 5.0-V inputs.  
The VCCIO pins on 5.0-V FLEX 6000 devices can be connected to either a  
3.3-V or 5.0-V power supply, depending on the output requirements.  
When the VCCIO pins are connected to a 5.0-V power supply, the output  
levels are compatible with 5.0-V systems. When the VCCIO pins are  
connected to a 3.3-V power supply, the output high is 3.3 V and is  
therefore compatible with 3.3-V or 5.0-V systems. Devices operating with  
VCCIO levels lower than 4.75 V incur a nominally greater timing delay of  
tOD2 instead of tOD1  
.
On 3.3-V FLEX 6000 devices, the VCCINT pins must be connected to a  
3.3-V power supply. Additionally, 3.3-V FLEX 6000A devices can interface  
with 2.5-V, 3.3-V, or 5.0-V systems when the VCCIO pins are tied to 2.5 V.  
The output can drive 2.5-V systems, and the inputs can be driven by 2.5-  
V, 3.3-V, or 5.0-V systems. When the VCCIO pins are tied to 3.3 V, the  
output can drive 3.3-V or 5.0-V systems. MultiVolt I/Os are not supported  
on 100-pin TQFP or 100-pin FineLine BGA packages.  
Table 7 describes FLEX 6000 MultiVolt I/O support.  
Table 7. FLEX 6000 MultiVolt I/O Support  
VCCINT  
(V)  
VCCIO  
(V)  
Input Signal (V)  
3.3  
Output Signal (V)  
2.5  
5.0  
2.5  
3.3  
5.0  
3.3  
3.3  
5.0  
5.0  
2.5  
3.3  
3.3  
5.0  
v
v
v
v
v
v
v
v
v
v
v
v (1)  
v
v
v
v
v
Note:  
(1) When V  
= 3.3 V, a FLEX 6000 device can drive a 2.5-V device that has 3.3-V  
CCIO  
tolerant inputs.  
Altera Corporation  
27  
 
 
 复制成功!