EP3C16M164C8N 参数 Datasheet PDF下载

1–4

Chapter 1: Cyclone III Device Family Overview

Cyclone III Device Family Features

lists Cyclone III device family package options, I/O pins, and differential

channel counts.

Table 1–2. Cyclone III Device Family Package Options, I/O pin and Differential Channel Counts

Family

Package

EP3C5

EP3C10

EP3C16

Cyclone III

E144

M164

106, 28

106, 28

92, 23

—

—

—

—

—

—

—

—

—

P240

—

—

F256

182, 68

182, 68

U256

182, 68

182, 68

168, 55

156, 54

—

—

—

—

—

—

—

—

F324

—

—

—

215, 83

195, 61

—

—

—

—

—

—

—

F484

—

—

346, 140

—

331, 127

327, 135

295, 113

283, 106

294, 113

294, 113

226, 87

226, 87

U484

—

—

346, 140

—

331, 127

327, 135

295, 113

—

294, 113

294, 113

—

—

F780

—

—

—

—

535, 227

377, 163

429, 181

531, 233

429, 181

429, 181

429, 181

429, 181

94, 22

94, 22

84, 19

82, 18

—

—

—

—

—

—

—

—

160, 47 168, 55

148, 43 156, 54

128, 26

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

EP3C25

EP3C40

EP3C55

EP3C80

EP3C120

EP3CLS70

Cyclone III EP3CLS100

LS

EP3CLS150

EP3CLS200

Notes to

(1) For each device package, the first number indicates the number of the I/O pin; the second number indicates the differential channel count.

(2) For more information about device packaging specifications, refer to the Cyclone III

webpage.

(3) The I/O pin numbers are the maximum I/O counts (including clock input pins) supported by the device package combination and can be affected

by the configuration scheme selected for the device.

(4) All packages are available in lead-free and leaded options.

(5) Vertical migration is not supported between Cyclone III and Cyclone III LS devices.

(6) The EP3C40 device in the F780 package supports restricted vertical migration. Maximum user I/Os are restricted to 510 I/Os if you enable

migration to the EP3C120 and are using voltage referenced I/O standards. If you are not using voltage referenced I/O standards, you can increase

the maximum number of I/Os.

(7) The E144 package has an exposed pad at the bottom of the package. This exposed pad is a ground pad that must be connected to the ground

plane on your PCB. Use this exposed pad for electrical connectivity and not for thermal purposes.

(8) All Cyclone III device UBGA packages are supported by the Quartus II software version 7.1 SP1 and later, with the exception of the UBGA

packages of EP3C16, which are supported by the Quartus II software version 7.2.

July 2012 Altera Corporation