欢迎访问ic37.com |
会员登录 免费注册
发布采购

EP2C35F672C8N 参数 Datasheet PDF下载

EP2C35F672C8N图片预览
型号: EP2C35F672C8N
PDF下载: 下载PDF文件 查看货源
内容描述: Cyclone II器件手册,卷1 [Cyclone II Device Handbook, Volume 1]
分类和应用: 现场可编程门阵列可编程逻辑LTE时钟
文件页数/大小: 470 页 / 5764 K
品牌: ALTERA [ ALTERA CORPORATION ]
 浏览型号EP2C35F672C8N的Datasheet PDF文件第82页浏览型号EP2C35F672C8N的Datasheet PDF文件第83页浏览型号EP2C35F672C8N的Datasheet PDF文件第84页浏览型号EP2C35F672C8N的Datasheet PDF文件第85页浏览型号EP2C35F672C8N的Datasheet PDF文件第87页浏览型号EP2C35F672C8N的Datasheet PDF文件第88页浏览型号EP2C35F672C8N的Datasheet PDF文件第89页浏览型号EP2C35F672C8N的Datasheet PDF文件第90页  
I/O Structure & Features  
standards (e.g., SSTL-2) independently. If an I/O bank does not use  
voltage-referenced standards, the VREF pins are available as user I/O  
pins.  
Each I/O bank can support multiple standards with the same VCCIO for  
input and output pins. For example, when VCCIO is 3.3-V, a bank can  
support LVTTL, LVCMOS, and 3.3-V PCI for inputs and outputs.  
Voltage-referenced standards can be supported in an I/O bank using any  
number of single-ended or differential standards as long as they use the  
same VREF and a compatible VCCIO value.  
MultiVolt I/O Interface  
The Cyclone II architecture supports the MultiVolt I/O interface feature,  
which allows Cyclone II devices in all packages to interface with systems  
of different supply voltages. Cyclone II devices have one set of VCC pins  
(VCCINT) that power the internal device logic array and input buffers that  
use the LVPECL, LVDS, HSTL, or SSTL I/O standards. Cyclone II devices  
also have four or eight sets of VCC pins (VCCIO) that power the I/O  
output drivers and input buffers that use the LVTTL, LVCMOS, or PCI  
I/O standards.  
The Cyclone II VCCINT pins must always be connected to a 1.2-V power  
supply. If the VCCINT level is 1.2 V, then input pins are 1.5-V, 1.8-V, 2.5-V,  
and 3.3-V tolerant. The VCCIO pins can be connected to either a 1.5-V,  
1.8-V, 2.5-V, or 3.3-V power supply, depending on the output  
requirements. The output levels are compatible with systems of the same  
voltage as the power supply (i.e., when VCCIO pins are connected to a  
1.5-V power supply, the output levels are compatible with 1.5-V systems).  
When VCCIO pins are connected to a 3.3-V power supply, the output high  
is 3.3-V and is compatible with 3.3-V systems. Table 2–20 summarizes  
Cyclone II MultiVolt I/O support.  
Table 2–20. Cyclone II MultiVolt I/O Support (Part 1 of 2)  
Note (1)  
Input Signal  
VCCIO (V)  
Output Signal  
1.8 V 2.5 V  
1.5 V  
1.8 V  
2.5 V  
3.3 V  
1.5 V  
v
v (3)  
v (5)  
3.3 V  
1.5  
1.8  
2.5  
v
v (4)  
v
v
v (2)  
v (2)  
v
v (2)  
v (2)  
v
v
v
v (5)  
2–60  
Cyclone II Device Handbook, Volume 1  
Altera Corporation  
February 2007  
 复制成功!