Chapter 1: Enhanced Configuration Devices (EPC4, EPC8, and EPC16) Data Sheet
1–33
Device Pin-Outs
Figure 1–9. Enhanced Configuration Device PCB Footprint Specifications for 100-Pin PQFP Packages (Note 1), (2)
0.65-mm Pad Pitch
0.325 mm
19.3 mm
0.410 mm
25.3 mm
2.4 mm
0.5
1.5
1.0
2.0mm
Notes to Figure 1–9:
(1) Used 0.5-mm increase for front and back of nominal foot length.
(2) Used 0.3-mm increase to maximum foot width.
f
For package outline drawings, refer to the Altera Device Package Information Data Sheet.
Device Pin-Outs
f
For pin-out information, refer to Altera Configuration Devices Pin-Out Files.
© December 2009 Altera Corporation
Configuration Handbook (Complete Two-Volume Set)