2–2
Chapter 2: Board Components
Board Overview
Board Overview
This section provides an overview of the MAX V CPLD development board,
including an annotated board image and component descriptions.
provides an overview of the development board features.
Figure 2–1. Overview of the MAX V CPLD Development Board Features
USB Type-B
Connector (J4)
Power LED USB LED
(D1)
(D3)
Footprint for
I
2
C EEPROM
(U6)
10-MHz Single-Ended Motor Control
External Oscillator
Header 1
(J1)
(J5)
GPIO Headers
(J6, J7)
MAX II CPLD
EPM240M100C4N
(For embedded
USB-Blaster) (U4)
Power
Regulator
(U7)
VAR_VCCIO
Voltage Output
Selection Jumper
(U7)
Footprint for
SPI EEPROM
(U8)
User
LEDs
(D7, D8)
User
Speaker
Capacitor
Push-Button
Header Sense Button
Switches (S1, S2) (J9)
(CPB1)
Motor Control
Header 2
(J10)
MAX V
CPLD
(U5)
describes the components and lists their corresponding board references.
Table 2–1. MAX V CPLD Development Board Components (Part 1 of 2)
Board Reference
Featured Device
U5
CPLD
MAX V 5M570ZF256C5N, 256-pin FBGA.
Type
Description
Configuration, Status, and Setup Elements
Connects the USB cable to the computer to enable embedded
USB-Blaster JTAG. The connector also supplies power to the board
through a USB cable when the cable is connected to a PC USB slot at
the other end.
J4
USB Type-B connector
MAX V CPLD Development Board Reference Manual
January 2011 Altera Corporation
ALTERA [ ALTERA CORPORATION ]
