Chapter 2: Board Components
2–7
Clock Circuitry
Table 2–6 lists the board-specific LEDs component references and manufacturing
information.
Table 2–6. Board-Specific LEDs Component References and Manufacturing Information
Board Reference
Description
Blue LED
Green LEDs
Manufacturer
Lite-On
Lumex Inc.
Manufacturer Part Number
LTST-C170TBKT
Manufacturer Website
www.liteon.com
D1
D3
SML-LXT0805GW-TR
www.lumex.com
Setup Elements
The development board does not have any setup elements.
1
To power-up the board, ensure that the VAR_VCCIOjumper is set to 3.3 V before
plugging the USB cable into the USB Type-B connector (J4).
Clock Circuitry
The development board includes a single-ended clock input on a 4-pin through-hole
socket. To replace the clock input with a different frequency oscillator, unplug the
current oscillator from the board and plug the desired oscillator into the 4-pin socket.
Figure 2–4 shows the MAX V CPLD development board clock input.
Figure 2–4. MAX V CPLD Development Board Clock Input
10 MHz
Single-Ended
Clock
5M570ZF256C5N
The development board also includes a 6-MHz crystal oscillator which provides the
input clock for the USB 2.0 PHY device.
Table 2–16 lists the oscillator component reference and the manufacturing
information.
Table 2–7. Oscillator Component Reference and Manufacturing Information
Board
Manufacturer
Part Number
Description
Manufacturer
Manufacturer Website
www.abracon.com
www.ctscorp.com
www.abracon.com
Reference
10-MHz oscillator, 3.3 V,
CMOS, 12.7 mm × 12.7 mm,
1/2-SZ, 30 ppm.
J1
X1
Y1
Abracon Corporation ACHL-10.000MHZ-EK
6-MHz crystal oscillator, 20pF
SMD.
CTS Corporation
ATS060SM-T
24-MHz oscillator, 3.3 V,
CMOS SMD 3.2 mm × 2.5 mm, Abracon Corporation
50 ppm.
ASE-24.000MHZ-ET
January 2011 Altera Corporation
MAX V CPLD Development Board Reference Manual