欢迎访问ic37.com |
会员登录 免费注册
发布采购

W89C840F 参数 Datasheet PDF下载

W89C840F图片预览
型号: W89C840F
PDF下载: 下载PDF文件 查看货源
内容描述: 局域网节点控制器\n [LAN NODE CONTROLLER ]
分类和应用: 控制器局域网
文件页数/大小: 72 页 / 708 K
品牌: ETC [ ETC ]
 浏览型号W89C840F的Datasheet PDF文件第1页浏览型号W89C840F的Datasheet PDF文件第2页浏览型号W89C840F的Datasheet PDF文件第4页浏览型号W89C840F的Datasheet PDF文件第5页浏览型号W89C840F的Datasheet PDF文件第6页浏览型号W89C840F的Datasheet PDF文件第7页浏览型号W89C840F的Datasheet PDF文件第8页浏览型号W89C840F的Datasheet PDF文件第9页  
W89C840F  
The W89C840F is a highly integrated Ethernet LAN controller for both 100BaseT and 10BaseT  
Ethernet. It provides a host bus interface complying with the PCI local bus specification revision 2.1, and  
the MII interface complying with the IEEE802.3u standard for easily implementing an Ethernet LAN  
adapter. The built-in 2K bytes transmit FIFO and 4K bytes receive FIFO, controlled by the on-chip bus  
master, are designed for improving network performance and reducing the host bus utilization.  
The on-chip DMA controller handles the data transfer between the host memory and the FIFOs.  
The data received from network are queued into the receive FIFO and then, directly moved into the host  
memory through the PCI bus. On the other hand, the transmitted data are fetched from the host memory  
and directly queued into the transmit FIFO. No extra on-board memory is needed for data buffering  
during the data transceiving operation.  
Many versatile registers, including host bus control registers, direct memory access(DMA)  
control registers, media access control registers, and signature identification registers, are implemented  
for system configuring. All of these long words accessible registers perform the status report and the  
precisely control on the transmit and receive operation. It also provides an extra channel for the on-line  
application program to update the on-board expansion ROM device in some specific application  
environment.  
Features  
l
l
l
l
l
l
l
l
l
l
l
Complies with IEEE 802.3, 802.3u, ANSI 8802-3 and Ethernet standards  
Supports PCI bus master mode for DMA operation, fully complying with PCI 2.1 standard  
Early interrupt function available for both transmit and receive  
Both half duplex and full duplex available  
Independent deep receive and transmit FIFO and no onboard memory required  
Flexible data structure for host compatibility and system performance  
Supports 25 to 33 Mhz PCI clock speed  
Supports full MII management function  
Provides EEPROM and flash memory on-board programming function  
Supports both big and little endian byte ordering for descriptor and buffer  
Flexible address filtering modes  
-- 64-bit hash-table and one perfect address  
-- All multicast and promiscuous  
l
l
l
l
l
A boot ROM interface, capable of supporting up to 256KB  
Supports programmable sub-vendor ID with automatic loading into configuration register  
Internal and external loopback mode for diagnostic  
Single 5 volt power supply  
100 pins PQFP package  
Publication Release Date:April 1997  
- 3 -  
Revision A1  
 复制成功!