FEDL87V2107-01
OKI Semiconductor
ML87V2107
4. System Reset Timing
Power ON
Crystal oscillation
stabilization time
10ms (Min.)
VDD
Power supply
voltage
0V
VOH
XTI, XTO
VOL
VDD
Don't care
RESET
0V
* After the power supply voltage reaches VDD (3.0 to 3.6 V), input 0 to the RESET pin for the “crystal oscillation
circuit stabilization time” + 10ms or more. The “crystal oscillation circuit stabilization time” input is unnecessary
if no crystal is used.
* After the RESET pin goes to 1, the I2C-bus interface can be used while the inputs of ICLK and OCLK are stable.
14/152