¡ Semiconductor
MSM5412222
Notes: 1. Input signal reference levels for the parameter measurement are V = 3.0 V and V
IH
IL
= 0 V. The transition time t is defined to be a transition time that signal transfers
T
between V = 3.0 V and V = 0 V.
IH
IL
2. AC measurements assume t = 3 ns.
T
3. Read address must have more than a 600 address delay than write address in every
cycle when asynchronous read/write is performed.
4. Read must have more than a 600 address delay than write in order to read the data
written in a current series of write cycles which has been started at last write reset
cycle: this is called "new data read".
When read has less than a 70 address delay than write, the read data are the data
writteninapreviousseriesofwritecycleswhichhadbeenwrittenbeforeatlastwrite
reset cycle: this is called "old data read".
5. When the read address delay is between more than 71 and less than 599, read data
will be undetermined. However, normal write is achieved in this address condition.
6. Outputs are measured with a load equivalent to 1 TTL load and 30 pF.
Output reference levels are V
= 2.0 V and V = 0.8 V.
OH
OL
10/15
OKI [ OKI ELECTRONIC COMPONETS ]
