1. SCOPE
1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and
M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part
or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
1.2 PIN. The PIN is as shown in the following example:
5962
-
04221
01
|
Q
|
|
|
X
|
|
|
C
|
|
|
|
|
|
|
|
|
|
|
Federal
stock class
designator
\
RHA
designator
(see 1.2.1)
Device
type
(see 1.2.2)
Device
class
designator
(see 1.2.3)
Case
outline
(see 1.2.4)
Lead
finish
(see 1.2.5)
/
\/
Drawing number
1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are
marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A
specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
1.2.2 Device type(s). The device type(s) identify the circuit function as follows:
Device type
Generic number
Circuit function
01
02
03
04
05
06
07
08
RTAX2000S
RTAX2000S-1
RTAX2000S
RTAX2000S-1
RTAX2000SL
RTAX2000SL-1
RTAX2000SL
RTAX2000SL-1
2,000,000 gate field programmable gate array
2,000,000 gate field programmable gate array
2,000,000 gate field programmable gate array
2,000,000 gate field programmable gate array
2,000,000 gate field programmable gate array
2,000,000 gate field programmable gate array
2,000,000 gate field programmable gate array
2,000,000 gate field programmable gate array
1/
2/
1/ 3/
4/
1/ 4/
4/ 5/
1/ 4/ 6/
Note: These devices are specified at junction operating temperature and not at case operating temperature.
1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level
as follows:
Device class
Device requirements documentation
M
Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN
class level B microcircuits in accordance with MIL-PRF-38535, appendix A
Q or V
Certification and qualification to MIL-PRF-38535
1/ Timing performance of the RTAX2000S-1 and RTAX2000SL-1 devices shall be approximately 15% faster than the
RTAX2000S and RTAX2000SL devices respectively (End users may select the appropriate device speed grade through
timing calculations based on timing simulation of specific designs with manufacturer's Libero/Designer software, see 6.7
herein).
2/ Device type 03 is device type 01 with additional testing (see 4.2.2.f).
3/ Device type 04 is device type 02 with additional testing (see 4.2.2.f).
4/ Silicon used for all devices is the same silicon, at 125oC final electrical test, device type 05 to 08 are screened to a lower
I
CCA limit (see Table I herein)
5/ Device type 07 is device type 05 with additional testing (see 4.2.2.f).
6/ Device type 08 is device type 06 with additional testing (see 4.2.2.f).
SIZE
STANDARD
5962-04221
A
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
SHEET
C
2
DSCC FORM 2234
APR 97
ACTEL [ Actel Corporation ]
