a-Si TFT LCD Single Chip Driver
240RGBx320 Resolution and 262K color
ILI9325
14.Electrical Characteristics
14.1. Absolute Maximum Ratings
The absolute maximum rating is listed on following table. When ILI9325 is used out of the absolute maximum
ratings, the ILI9325 may be permanently damaged. To use the ILI9325 within the following electrical
characteristics limit is strongly recommended for normal operation. If these electrical characteristic conditions
are exceeded during normal operation, the ILI9325 will malfunction and cause poor reliability.
Item
Symbol
IOVCC
Unit
V
V
V
V
V
V
V
V
Value
-0.3 ~ + 4.6
-0.3 ~ + 4.6
-0.3 ~ + 6.0
-0.3 ~ + 4.6
-0.3 ~ + 9.0
-0.3 ~ + 18.5
-0.3 ~ + 18.5
-0.3 ~ VCC+ 0.3
-40 ~ + 85
Note
1, 2
1, 4
1, 4
1
1, 5
1, 5
1, 6
1
Power supply voltage (1)
Power supply voltage (1)
Power supply voltage (1)
Power supply voltage (1)
Power supply voltage (1)
Power supply voltage (1)
Power supply voltage (1)
Input voltage
VCI - GND
DDVDH - GND
GND -VCL
DDVDH - VCL
VGH - GND
GND - VGL
Vt
Operating temperature
Storage temperature
Notes:
Topr
Tstg
°C
°C
8, 9
8, 9
-55 ~ + 110
1. GND must be maintained
2. (High) (VCC = VCC) ≥ GND (Low), (High) IOVCC ≥ GND (Low).
3. Make sure (High) VCI ≥ GND (Low).
4. Make sure (High) DDVDH ≥ GND (Low).
5. Make sure (High) DDVDH ≥ VCL (Low).
6. Make sure (High) VGH ≥ GND (Low).
7. Make sure (High) GND ≥ VGL (Low).
8. For die and wafer products, specified up to 85°C.
9. This temperature specifications apply to the TCP package
The information contained herein is the exclusive property of ILI Technology Corp. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of ILI Technology Corp.
Page 106 of 111
Version: 0.35
ETC [ ETC ]
