HY29F800
ORDERING INFORMATION
Hyundai products are available in several speeds, packages and operating temperature ranges. The
ordering part number is formed by combining a number of fields, as indicated below. Refer to the ‘Valid
Combinations’ table, which lists the configurations that are planned to be supported in volume. Please
contact your local Hyundai representative or distributor to confirm current availability of specific con-
figurations and to determine if additional configurations have been released.
HY29F800 X
X
-
X
X
X
SPECIAL INSTRUCTIONS
TEMPERATURE RANGE
Blank = Commercial ( 0 to +70 °C)
I = Industrial (-40 to +85 °C)
E = Extended (-55 to +125 °C)
SPEED OPTION
55 = 55 ns
70 = 70 ns
90 = 90 ns
12 = 120 ns
PACKAGE TYPE
G = 44-Pin Plastic Small Outline Package (PSOP)
T = 48-Pin Thin Small Outline Package (TSOP)
R = 48-Pin Thin Small Outline Package (TSOP) with
Reverse Pinout
BOOT BLOCK LOCATION
T= Top Boot Block Option
B= Bottom Boot Block Option
DEVICE NUMBER
HY29F800 = 8 Megabit (1M x 8/512K x 16) CMOS 5 Volt-Only
Sector Erase Flash Memory
VALID COMBINATIONS
Package and Speed
PSOP
TSOP
Reverse TSOP
Temperature
Commercial
Industrial
55 ns 70 ns 90 ns 120 ns 55 ns 70 ns 90 ns 120 ns 55 ns 70 ns 90 ns 120 ns
G-55 G-70 G-90 G-12 T-55 T-70 T-90 T-12 R-55 R-70 R-90 R-12
G-55I G-70I G-90I G-12I T-55I T-70I T-90I T-12I R-55I R-70I R-90I R-12I
Please contact your Hyundai representative or distributor for current availability
Extended
Note:
1. The complete part number is formed by appending the suffix shown in the table to the Device Number. For example, the
part number for a 90 ns, Industrial temperature range device in the TSOP package with the top boot block option is
HY29F800TT-90I.
Rev. 4.0/Jan. 00
38
ETC [ ETC ]
