SERIES
101-102-103
50,100 & 200 AMP SINGLE POLE DC CONTACTORS
GENERAL SPECIFICATIONS
COIL
Pull-in Voltage:
DC: 80% of nominal voltage measured at 25˚C
10% of nominal voltage or more @ 25˚C
110% of nominal voltage
Dropout Voltage:
Max. allowed voltage:
Coil Resistance:
±10% Measured @ 25˚C
CONTACTS
Contact Material:
Silver Cadmium Oxide.
TIMING
Operate Time:
Release Time:
60 mS Max. @ Nominal Voltage.
30 mS Max. @ Nominal Voltage.
DIELECTRIC STRENGTH
All Mutually Insulated Points:
1500 V rms between all mutually
Insulated current carrying parts and those
parts to ground.
Insulation Resistance:
500 VDC Exceeds 1000 Megohms.
TEMPERATURE
Temperature Rating:
-45˚C to +65˚C @ rated operation.
LIFE EXPECTANCY
Mechanical:
500,000 Operations no load
100,000 Operations @ Rated Load.
Electrical:
TERMINALS
Coil
Load Term.
#10-32
101 - #6-32
102 - #8-32
103 - #8-32
#1/4-20
#3/8-18
MOUNTING
Weight
Clearance Holes, ea. .265 in dia.
13 oz., 370 Grams
AC CONTACT RATINGS
RESISTIVE LOAD (AMPS)
VOLTAGE
AC (60HZ)
120
Series 101 Series 102
Series 103
50
50
200
200
100
100
240
DC CONTACT RATING
VOLTAGE
(DC)
RESISTIVE LOAD (AMPS)
30
100
200
50
DC COIL SPECIFICATIONS @ 25˚C
101HXX
102HXX
103HXX
(9W Max)
(10.5W Max)
(13.3W Max)
Nominal
Voltage
(VDC)
Resistance
Ohms ± 10%
10.8
Resistance
Ohms ± 10%
26
98
267
Resistance
Ohms ± 10%
17
75
290
12
28
48
59
173
PART NUMBER SHOWN ALSO AVAILABLE THRU STOCKING DISTRIBUTION
PAGE 156
WEBSITE: www.magnecraft.com EMAIL:info@magnecraft.com FAX ON DEMAND 1-800/891-2957, DOCUMENT 100
ETC [ ETC ]
