C L6A S S
DC CONTROLLED INPUT DC OUTPUT
CLASS 6
DC CONTROLLED INPUT
DC OUTPUT
Transformer-Isolated, for 2500 VAC isolation
between input and output and RFI suppression.
NEW!
L.E.D. "ON" LAMP
Recognized to Canadian safety
requirements under the Component
Recognition Program of Underwriters
Laboratories Inc.
UL Recognized
File No. E52197
INPUT CHARACTERISTICS
3.5 to 32 VDC
1000 ohms minimum
100 uS: On, 1.0 mS: Off 600 uS: On, 2.6 mS Off
200 Volts per microsecond
Input Impedance
Response Time
Maximum Rate of Rise of Off State Voltage dv/dt
0
to 200 VDC
OUTPUT CHARACTERISTICS
40
20 mA
90
25
20 mA
50
12.0
20 mA
27
17
2.83
2.1
Rated Load Current (Amps rms)
Minimum Load current to maintain "On"
Non-Repetitive Surge Current (1 cycle surge)
FW rectified current repetitive 60 Hz Amps peak
Voltage drop across output @ rated current
Max I2T For Fusing ( t= 8-3ms) A2 sec
Thermal Resistance Junction To Case 0c/w
Max. off state leakage current:
-
-
2.83
2.1
1.06
12 mA
2.83
2.1
1.06
12 mA
1.06
12 mA
SEE COMPLETE SPECIFICATIONS PAGES 83 & 84
0UTPUT (Over Operating Temperature Range)
INPUT (Over Operating Temperature Range)
CROSS REFERENCE
CRYDOM
PART
NUMBERS
MAX.
MIN.
CONTROL
VOLTAGE
RANGE
NOMINAL
VOLTAGE
RANGE
MAX.
CURRENT
RATING
PULL-IN
VOLTAGE
DROPOUT
VOLTAGE
W6212DDX-1
W6225DDX-1
W6240DDX-1
D2D12
D1D20*
D1D40*
1 VDC
1 VDC
1 VDC
3.5 VDC
3.5 VDC
3.5 VDC
12 AMPS
25 AMPS
40 AMPS
3.5 - 32 VDC
3.5 - 32 VDC
3.5 - 32 VDC
0 -200 VDC
0 -200 VDC
0 -200 VDC
Part Numbers shown also available thru stocking distribution.
All current ratings are based on use of suitable thermally conductive compound (e.g. silicone grease between the SSR
mounting base and mounting surface of suitable heat sink).
* Crydom relays only rated at 0 - 100 VDC.
PAGE 107
WEBSITE: www.magnecraft.com - EMAIL:info@magnecraft.com - FAX ON DEMAND 1-800/891-2957 - DOCUMENT 100
ETC [ ETC ]
