Changing the menu’s position
Enlarging or reducing the picture
(ZOOM)
Adjusting the color of the picture
(COLOR)
Additional settings (OPTION)
Change the menu’s position if it is blocking an image on the
screen.
To change the menu’s on-screen position, first move
You can manually degauss (demagnetize) the monitor, adjust the
moire cancellation level, change the menu position, and lock the
controls.
This setting is stored in memory for the current input signal.
The COLOR settings allow you to adjust the picture’s color
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high. This adjustment is useful for matching the
monitor’s colors to a printed picture’s colors.
the control button m/M to select
(OSD H POSITION)
for horizontal adjustment, or
(OSD V POSITION) for
1
2
Press the center of the control button.
The main MENU appears on the screen.
vertical adjustment. Then move the control button
</, to shift the on-screen menu.
1
2
Press the center of the control button.
The main MENU appears on the screen.
Move the control button to highlight
CENTER and press the center of the control
button again.
SIZE or
This setting is stored in memory for all input signals.
Move the control button to highlight
press the center of the control button again.
OPTION and
Locking the controls
1
2
Press the center of the control button.
The main MENU appears on the screen.
To protect adjustment data by locking the controls, first
The OPTION menu appears on the screen.
The SIZE/CENTER menu appears on the screen.
move the control button m/M to select
LOCK). Then move the control button ,, to select ON.
Only the 1 (power) switch, EXIT, and (CONTROL LOCK)
of the OPTION menu will operate. If any other items are selected,
the mark appears on the screen.
(CONTROL
3
Move the control button m/M to select the desired
adjustment item.
3
Move the control button m/M to select
and move </, to enlarge or reduce the picture.
(zoom),
Move the control button to highlight
press the center of the control button again.
COLOR and
Adjust the selected item according to the following
instructions.
The COLOR menu appears on the screen.
Notes
•
•
Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
The horizontal adjustment value is not displayed in the menu.
To cancel the control lock
Repeat the procedure above and set
3
Move the control button m/M to select a color
temperature.
The preset color temperatures are 5000K and 9300K. Since
the default setting is 9300K, the whites will change from a
bluish hue to a reddish hue as the temperature is lowered to
5000K.
Degaussing the screen
(CONTROL LOCK) to OFF.
The monitor is automatically demagnetized (degaussed) when the
power is turned on.
To manually degauss the monitor, first move the
control button m/M to select
the control button ,.
The screen is degaussed for about 5 seconds. If a second degauss
cycle is needed, allow a minimum interval of 20 minutes for the
best result.
Adjusting the shape of the picture
(GEOM)
(DEGAUSS). Then move
4
If necessary, fine tune the color temperature.
You can select your own color temperature between 9300K
and 5000K.
The GEOM settings allow you to adjust the rotation and shape of
the picture.
GB
The
(rotation) setting is stored in memory for all input signals.
First move the control button m/M to select
the control button </, to adjust the color temperature.
. Then move
Adjusting the moire*
All other settings are stored in memory for the current input
signal.
If elliptical or wavy patterns appear on the screen, adjust the
moire cancellation level.
COLOR
To adjust the amount of moire cancellation, first move
9 3 0 0K
5 0 0 0K
1
2
Press the center of the control button.
The main MENU appears on the screen.
the control button m/M to select
(MOIRE ADJUST).
2 6
Then move the control button </, until the moire
effect is at a minimum.
Move the control button to highlight
GEOM and
press the center of the control button again.
The GEOMETRY menu appears on the screen.
*
Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern
of the picture on the screen and the phosphor pitch pattern of the
monitor.
3
First move the control button m/M to select the
desired adjustment item. Then move the control
button </, to make the adjustment.
Adjusting the convergence (CONV)
The CONV settings allow you to adjust the quality of the picture
by controlling the convergence. The convergence refers to the
alignment of the red, green, and blue color signals.
If you see red or blue shadows around letters or lines, adjust the
convergence.
Example of moire
Select
To
rotate the picture
expand or contract the picture sides
These settings are stored in memory for all input signals.
shift the picture sides to the left or right
adjust the picture width at the top of the screen
1
2
Press the center of the control button.
The main MENU appears on the screen.
shift the picture to the left or right at the top of the
screen
Move the control button to highlight
press the center of the control button again.
CONV and
The CONVERGENCE menu appears on the screen.
3
First move the control button m/M to select
for
horizontal adjustment, or
for vertical
adjustment. Then move the control button </, to
adjust the convergence.
10
11
ETC [ ETC ]
