Z8 Encore! XP® 4K Series
Product Specification
128
ADCDL—ADC Data Low Bits
These bits are the least significant five bits of the 13-bits of the ADC output. These bits are
undefined after a Reset.
Reserved—Must be undefined.
OVF—Overflow Status
0= A hardware overflow did not occur in the ADC for the current sample.
1= A hardware overflow did occur in the ADC for the current sample, therefore the cur-
rent sample is invalid.
ADC High Threshold Register
The ADC High Threshold (ADCTHH) register is used to set the trigger point above which
an ADC sample causes a CPU interrupt.
Table 76. ADC High Threshold High Byte (ADCTHH)
7
6
5
4
3
2
1
0
BITS
ADCTHH
FF
FIELD
RESET
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
F74H
ADDR
ADCTHH—ADC High Threshold
These bits are compared to the most significant 8 bits of the single-ended ADC value. If
the ADC value exceeds this, an interrupt is asserted. The alarm function is not available in
DIFFERENTIAL mode.
ADC Low Threshold Register
The ADC Low Threshold (ADCTLH) register is used to set the trigger point below which
an ADC sample causes a CPU interrupt.
Table 77. ADC Low Threshold High Byte (ADCTLH)
7
6
5
4
3
2
1
0
BITS
ADCTLH
FIELD
RESET
R/W
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
F76H
ADDR
ADCTLH—ADC Low Threshold
These bits are compared to the most significant 8 bits of the single-ended ADC value. If
PS022815-0206
Analog-to-Digital Converter
ZILOG [ ZILOG, INC. ]
