R
XC3000 Series Field Programmable Gate Arrays
XC3100L Switching Characteristics
Xilinx maintains test specifications for each product as controlled documents. To insure the use of the most recently released
device performance parameters, please request a copy of the current test-specification revision.
XC3100L Operating Conditions
Symbol
Description
Supply voltage relative to GND Commercial 0°C to +85°C junction
High-level input voltage
Min
3.0
Max
Units
V
V
3.6
CC
V
2.0
V
+ 0.3
CC
V
IH
V
Low-level input voltage
-0.3
0.8
V
IL
T
Input signal transition time
250
ns
IN
Notes: 1. At junction temperatures above those listed as Operating Conditions, all delay parameters increase by 0.3% per °C.
2. Although the present (1996) devices operate over the full supply voltage range from 3.0 V to 5.25 V, Xilinx reserves the right
to restrict operation to the 3.0 and 3.6 V range later, when smaller device geometries might preclude operation @ 5 V.
Operating conditions are guaranteed in the 3.0 – 3.6 V V
range.
CC
XC3100L DC Characteristics Over Operating Conditions
Symbol
Description
High-level output voltage (@ I = -4.0 mA, V min)
Min
Max
Units
V
2.4
OH
CC
V
OH
High-level output voltage (@ I = -100.0 µA, V min)
V -0.2
CC
V
OH
CC
Low-level output voltage (@ I = 4.0 mA, V min)
0.40
0.2
V
OH
CC
V
OL
Low-level output voltage (@ I = +100.0 µA, V min)
V
OH
CC
7
V
Power-down supply voltage (PWRDWN must be Low)
2.30
-10
V
CCPD
I
Quiescent FPGA supply current
Chip thresholds programmed as CMOS levels1
1.5
mA
CCO
I
Input Leakage Current
+10
µA
IL
Input capacitance
(sample tested)
C
I
IN
All pins except XTL1 and XTL2
XTL1 and XTL2
Pad pull-up (when selected) @ V = 0 V 3
10
15
pF
pF
0.02
0.20
0.17
2.80
mA
mA
RIN
IN
Horizontal long line pull-up (when selected) @ logic Low
IRLL
Notes: 1. With no output current loads, no active input or long line pull-up resistors, all package pins at V
or GND, and the FPGA
CC
configured with a tie option.
2. Total continuous output sink current may not exceed 100 mA per ground pin. Total continuous output source current may not
exceed 100 mA per V pin. The number of ground pins varies from the XC3142L to the XC3190L.
CC
3. Not tested. Allows undriven pins to float High. For any other purpose, use an external pull-up.
November 9, 1998 (Version 3.1)
7-59