WM8580
Production Data
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously operating at
or beyond these limits. Device functional operating limits and guaranteed performance specifications are given under Electrical
Characteristics at the test conditions specified.
ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically susceptible
to damage from excessive static voltages. Proper ESD precautions must be taken during handling and storage
of this device.
The WM8580 has been classified as MSL1, which has an unlimited floor life at <30oC / 85% Relative Humidity and therefore will
not be supplied in moisture barrier bags.
CONDITION
MIN
MAX
Digital supply voltage
-0.3V
+3.63V
Analogue supply voltage
-0.3V
-0.3V
+7V
+5V
+7V
PLL supply voltage
Voltage range digital inputs (SCLK, CSB & SDIN only)
DGND -0.3V
Voltage range digital inputs
DGND -0.3V
DVDD + 0.3V
Voltage range analogue inputs 1
AGND -0.3V
PGND -0.3V
AVDD +0.3V
PVDD +0.3V
37MHz
Master Clock Frequency
Operating temperature range, TA
-40°C
+85°C
Storage temperature prior to soldering
Storage temperature after soldering
30°C max / 85% RH max
-65°C
+150°C
+260°C
+183°C
Pb Free Package body temperature (soldering 10 seconds)
Package body temperature (soldering 2 minutes)
Notes: 1. Analogue and digital grounds must always be within 0.3V of each other.
PD Rev 4.3 August 2007
8
w
WOLFSON [ WOLFSON MICROELECTRONICS PLC ]
