欢迎访问ic37.com |
会员登录 免费注册
发布采购

W90N745CDG 参数 Datasheet PDF下载

W90N745CDG图片预览
型号: W90N745CDG
PDF下载: 下载PDF文件 查看货源
内容描述: 16位/ 32位ARM微控制器 [16/32-bit ARM microcontroller]
分类和应用: 微控制器和处理器外围集成电路时钟
文件页数/大小: 422 页 / 2455 K
品牌: WINBOND [ WINBOND ]
 浏览型号W90N745CDG的Datasheet PDF文件第102页浏览型号W90N745CDG的Datasheet PDF文件第103页浏览型号W90N745CDG的Datasheet PDF文件第104页浏览型号W90N745CDG的Datasheet PDF文件第105页浏览型号W90N745CDG的Datasheet PDF文件第107页浏览型号W90N745CDG的Datasheet PDF文件第108页浏览型号W90N745CDG的Datasheet PDF文件第109页浏览型号W90N745CDG的Datasheet PDF文件第110页  
W90N745CD/W90N745CDG  
LC [23]: Late Collision  
The LC indicates the collision occurred in the outside of 64 bytes collision window. This means after  
the 64 bytes of a frame has transmitted out to the network, the collision still occurred. The late collision  
check will only be done while EMC is operating on half-duplex mode.  
1’b0: No collision occurred in the outside of 64 bytes collision window.  
1’b1: Collision occurred in the outside of 64 bytes collision window.  
TXABT [22]: Transmission Abort  
The TXABT indicates the packet incurred 16 consecutive collisions during transmission, and then the  
transmission process for this packet is aborted. The transmission abort is only available while EMC is  
operating on half-duplex mode.  
1’b0: Packet doesn’t incur 16 consecutive collisions during transmission.  
1’b1: Packet incurred 16 consecutive collisions during transmission.  
NCS [21]: No Carrier Sense  
The NCS indicates the MII I/F signal CRS doesn’t active at the start of or during the packet  
transmission. The NCS is only available while EMC is operating on half-duplex mode.  
1’b0: CRS signal actives correctly.  
1’b1: CRS signal doesn’t active at the start of or during the packet transmission.  
EXDEF [20]: Defer Exceed  
The EXDEF indicates the frame waiting for transmission has deferred over 0.32768ms on 100Mbps  
mode, or 3.2768ms on 10Mbps mode. The deferral exceed check will only be done while bit NDEF of  
MCMDR is disabled, and EMC is operating on half-duplex mode.  
1’b0: Frame waiting for transmission has not deferred over 0.32768ms (100Mbps) or 3.2768ms  
(10Mbps).  
1’b1: Frame waiting for transmission has deferred over 0.32768ms (100Mbps) or 3.2768ms (10Mbps).  
TXCP [19]: Transmission Complete  
The TXCP indicates the packet transmission has completed correctly.  
1’b0: The packet transmission doesn’t complete.  
1’b1: The packet transmission has completed.  
DEF [17]: Transmission Deferred  
The DEF indicates the packet transmission has deferred once. The DEF is only available while EMC  
is operating on half-duplex mode.  
1’b0: Packet transmission doesn’t defer.  
1’b1: Packet transmission has deferred once.  
Publication Release Date: September 22, 2006  
- 101 -  
Revision A2  
 复制成功!