W83627HF/ F/ HG/ G
BEEP Control Register 2 - Index 57h (Bank 0)
Register Location: 57h
Power on Default Value: 80h
Attribute:
Size:
Read/Write
8 bits
7
6
5
4
3
2
1
0
EN_V12_BP
EN_NV12_BP
EN_NV5_BP
EN_FAN3_BP
EN_CASO_BP
EN_T3_BP
Reserved
EN_GBP
Bit 7: Enable Global BEEP. Write 1, enable global BEEP output. Default 1. Write 0, disable all BEEP
output.
Bit 6: Reserved. This bit should be set to 0.
Bit5: Enable BEEP Output from Temperature Sensor 3 if the monitor value exceed the limit value.
Write 1, enable BEEP output. Default 0
Bit 4: Enable BEEP output for case open if the monitor value exceed the limit value. Write 1, enable
BEEP output. Default is 0.
Bit 3: Enable BEEP Output from FAN 3 if the monitor value exceed the limit value. Write 1, enable
BEEP output. Default is 0.
Bit 2: Enable BEEP output from -5V, Write 1, enable BEEP output if the monitor value exceed the
limits value. Default is 0, which is disable BEEP output.
Bit 1: Enable BEEP output from -12V, Write 1, enable BEEP output if the monitor value exceed the
limits value. Default is 0, which is disable BEEP output.
Bit 0: Enable BEEP output from +12V, Write 1, enable BEEP output if the monitor value exceed the
limits value. Default is 0, which is disable BEEP output.
Publication Release Date: June 09, 2006
- 57 -
Revision 2.27