W83627HF/ F/ HG/ G
Winbond Test Register - Index 50h ~ 55h （Bank 0）
These registers are reserved for Winbond internal use.
BEEP Control Register 1 - Index 56h （Bank 0）
Register Location：
Power on Default Value：
Attribute：
56h
00h
Read/Write
8 bits
Size：
7
6
5
4
3
2
1
0
EN_VCA_BP
EN_VCB_BP
EN_V33_BP
EN_V5_BP
EN_T1_BP
EN_T2_BP
EN_FAN1_BP
EN_FAN2_BP
Bit 7： Enable BEEP Output from FAN 2 if the monitor value exceed the limit value. Write 1, enable
BEEP output, which is default value.
Bit 6： Enable BEEP Output from FAN 1 if the monitor value exceed the limit value. Write 1, enable
BEEP output, which is default value.
Bit 5： Enable BEEP Output from Temperature Sensor 2 if the monitor value exceed the limit value.
Write 1, enable BEEP output. Default 0
Bit 4： Enable BEEP output for Temperature Sensor 1 if the monitor value exceed the limit value.
Write 1, enable BEEP output. Default 0
Bit 3： Enable BEEP output from VDD （+5V）, Write 1, enable BEEP output if the monitor value ex-
ceed the limits value. Default is 0, which is disable BEEP output.
Bit 2： Enable BEEP output from +3.3V. Write 1, enable BEEP output, which is default value.
Bit 1： Enable BEEP output from VCOREB. Write 1, enable BEEP output, which is default value.
Bit 0： Enable BEEP Output from VCOREA if the monitor value exceed the limits value. Write 1, en-
able BEEP output, which is default value
- 56 -
WINBOND [ WINBOND ]
