CMA3000-D0X Series
•
•
PWB areas that can bend or vibrate.
The use of under fill or coating. Please note that under fill or coating the neighboring
component should not be in contact with the sensor.
Due to sampled signal conditioning strong magnetic or electric fields may cause noise in the sensor
output. Therefore mounting near strong magnetic or electric fields is not recommended.
7.5 Assembly instructions
The Moisture Sensitivity Level (MSL) of the CMA3000 component is 2 according to the IPC/JEDEC
J-STD-020D. Please refer to the document TN68_CMA3000_Assembly_Instructions for more
detailed information about CMA3000 assembly.
7.6 Tape and reel specifications
Please refer to the document TN68_CMA3000_Assembly_Instructions for tape and reel
specifications.
VTI Technologies Oy
www.vti.fi
25/ 35
Doc.Nr. 8281000.12
Rev. 0.12
VTI [ VTI TECHNOLOGIES ]
