VITESSE
SEMICONDUCTOR CORPORATION
2.488Gb/s SONET/SDH
Advance Product Information
STS-48/STM-16 Section Terminator
VSC8151
Absolute Maximum Ratings
Power Supply Voltage (VCC) Potential to GND ............................................................................-0.5 V to +4.3 V
Power Supply Voltage (VMM) Potential to GND ...........................................................................-0.5 V to +3.0 V
TTL Input Voltage Applied ..........................................................................................................-0.5 V to + 5.5V
ECL Input Voltage Applied ...................................................................................................+0.5 V to VTT -0.5 V
Output Current (IOUT)................................................................................................................................... 50 mA
o
o
Case Temperature Under Bias (TC)................................................................................................-55 to + 125 C
o
o
Storage Temperature (TSTG) ...........................................................................................................-65 to + 150 C
Note: Caution: Stresses listed under “Absolute Maximum Ratings” may be applied to devices one at a time without causing per-
manent damage. Functionality at or exceeding the values listed is not implied. Exposure to these values for extended
periods may affect device reliability.
Recommended Operating Conditions
Power Supply Voltages (VCC).............................................................................................................. +3.3V ±5 %
Power Supply Voltages (VMM)............................................................................................................. +2.0V ±5 %
o
o
Commercial Operating Temperature Range* (T).................................................................................. 0 to 85 C
Notes: (1)Lower limit of specification is ambient temperature and upper limit is case temperature.
(2)Customer must use air cooled/heatsink environment to meet thermal requirements of the package.
ESD Ratings
Proper ESD procedures should be used when handling this product. The VSC8151 is rated to the following
ESD voltages based on the human body model:
1. All pins are rated at or above 1500V.
Page 20
VITESSE SEMICONDUCTOR CORPORATION
741 Calle Plano, Camarillo, CA 93012 • 805/388-3700 • FAX: 805/987-5896
G52225-0, Rev. 2.3
8/16/99