VSC6134
Datasheet
The 64 possible values (0 to 63) are spread across four hash table configuration registers. Bits 0 to 15 of
register HASH0 are used for the XORing result of 0 to 15. Bits 0 to 15 of register HASH1 are used for
the XORing result of 16 to 31. Bits 0 to 15 of register HASH2 are used for XORing result of 32 to 47.
Bits 0 to 15 of register HASH3 are used for XORing result of 48 to 63. To program a particular
destination address as acceptable, set to 1 the bit corresponding to the result of the XORing of the bytes
of the address (as described in this section).
2.10.2
10-GbE Receiver Monitor Register Information
For information about the 10-GbE receiver monitor registers, see “10 GbE Receiver Monitor Registers,”
page 323.
139 of 438
VMDS-10185 Revision 4.0
July 2006
VITESSE [ VITESSE SEMICONDUCTOR CORPORATION ]
