user Guide
VI BRICK® AC Front End
Evaluation Board
November 2012
Contents
Page
Features
> Oscilloscope probe jack for output voltage and ripple measurements
> Simple to use
Features
1
1
3
5
6
Introduction
Set Up
> Ring lug, screw terminal, and solder connection options
> Replaceable fuse (5A, 216 Littelfuse recommended)
Bill of Materials
Recommended
Hardware
IMPORTANT NOTICE:
Please read this user guide before operating evaluation board.
Thermals
6
6
Ordering Info
Introduction
The VI BRICK AC Front End Evaluation Board offers a convenient means to evaluate
the performance of Vicor’s VI BRICK AC Front End module and has been optimized
for user convenience. Refer to the table below for operating conditions and limits.
This product contains an input line filter. It is important to remember the response
of the AC line filter is dependent upon the wiring connected to the evaluation board.
Care should be exercised to minimize stray source impedances in order to fully
exercise the features of the converter.
vicorpower.com
Applications Engineering: 800 735.6200
Rev 1.2
Page 1
VICOR [ VICOR CORPORATION ]
