TMCM-1070 Hardware Manual • Hardware Version V1.00 | Document Revision V1.00 • 2016-Sept-16
8 / 23
3.2 Mounting Considerations
TMCM-1070 is designed to be mountable on the back of a NEMA17 motor. Alternatively it can be mounted
standalone.
Thermal Considerations
NOTICE
If not mounted to a motor take care for a proper cooling. The electronics have an
overtemperature shutdown, nevertheless damage to electronics or system can
be caused by excessive temperature.
3.2.1 Top Hat Rail Mounting
To mount the drive on a top hat rail, TRINAMIC offers a fitting top hat rail clip. The order code is provided
in table 2.
Figure 6: TMCM-1070 top hat rail mounting clip example with module
©2016 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.