TMCM-1070 Hardware Manual • Hardware Version V1.00 | Document Revision V1.00 • 2016-Sept-16
6 / 23
2 Order Codes
Order Code Description
Size (LxWxH)
TMCM-1070 Controller/Driver Module without motor, +24V DC, TTL UART 42mm x 42mm x 12mm
interface, S/D interface, Enable, Mode Select
Table 1: Order codes modules
Order Code
Description
TMCM-1070-CABLE
Cable loom for TMCM-1070. Contains:
• 1x cable loom for motor connector with 4-pin JST PH female connector
• 1x cable loom for I/O connector with 9-in JST PH female connector
TMCM-KAMINO-CLIP
Self-Adhesive top hat rail mounting clip for TMCM-1070 base module (not
available with PANdrive versions PD42-x-1070)
TMCM-KAMINO-AP23 Aluminum adapter plate kit for mounting of TMCM-1070 base module to
NEMA23 size motors (not available with PANdrive versions PD42-x-1070)
TMCM-KAMINO-AP24 Aluminum adapter plate kit for mounting of TMCM-1070 base module to
NEMA24 size motors (not available with PANdrive versions PD42-x-1070)
Table 2: Order codes cable loom
©2016 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.
TRINAMIC [ TRINAMIC MOTION CONTROL GMBH & CO. KG. ]
