TS8GSSD25S-S
TS16GSSD25S-S/M
TS32GSSD25S-S/M
TS64GSSD25S-S/M
TS128GSSD25S-M
TS192GSSD25S-M
2.5” Solid State Disk
WRITE MULTIPLE EXT (39h)
48-bit feature set mandatory command. This command is similar to the Write Sectors command. Interrupts are not
presented on each sector, but on the transfer of a block which contains the number of sectors defined by Set Multiple
command.
WRITE MULTIPLE FUA EXT (CEh)
48-bit feature set mandatory command. This command provides the same functionality as the WRITE MULTIPLE EXT
command except that regardless of whether volatile and/or non-volatile write caching in the device is enabled or not, the
user data shall be written to non-volatile media before command completion is reported.
WRITE SECTOR(S) (30h/31h)
Write data to a specified number of sectors (1 to 256, as specified with the Sector Count register) from the specified
address. Specify “00h” to write 256 sectors.
WRITE SECTOR(S) EXT (34h)
48-bit feature set mandatory command. Write data to a specified number of sectors (1 to 65536, as specified with the
Sector Count register) from the specified address. Specify “00h” to write 65536 sectors.
37
Transcend Information Inc.
V2.4
TRANSCEND [ TRANSCEND INFORMATION. INC. ]
