欢迎访问ic37.com |
会员登录 免费注册
发布采购

TVP5160PNP 参数 Datasheet PDF下载

TVP5160PNP图片预览
型号: TVP5160PNP
PDF下载: 下载PDF文件 查看货源
内容描述: NTSC / PAL / SECAM /组件2×10位数字视频解码器 [NTSC/PAL/SECAM/Component 2x10-Bit Digital Video Decoder]
分类和应用: 解码器
文件页数/大小: 111 页 / 1417 K
品牌: TI [ TEXAS INSTRUMENTS ]
 浏览型号TVP5160PNP的Datasheet PDF文件第43页浏览型号TVP5160PNP的Datasheet PDF文件第44页浏览型号TVP5160PNP的Datasheet PDF文件第45页浏览型号TVP5160PNP的Datasheet PDF文件第46页浏览型号TVP5160PNP的Datasheet PDF文件第48页浏览型号TVP5160PNP的Datasheet PDF文件第49页浏览型号TVP5160PNP的Datasheet PDF文件第50页浏览型号TVP5160PNP的Datasheet PDF文件第51页  
TVP5160  
www.ti.com  
SLES135EFEBRUARY 2005REVISED APRIL 2011  
Table 3-12. Luminance Processing Control 3  
Subaddress 08h  
Default  
00h  
7
6
5
4
3
2
1
0
Reserved  
Trap filter select [1:0]  
Trap filter select[1:0] selects one of the four trap filters to produce the luminance signal by removing the chrominance signal from the  
composite video signal. The stop band of the chroma trap filter is centered at the chroma subcarrier frequency with stopband bandwidth  
controlled by the two control bits. Changing this register will trade luma resolution for dot crawl.  
Trap filter stop band bandwidth (MHz):  
Filter select [1:0]  
NTSC ITU-R 601  
1.2129  
PAL ITU-R 601  
1.2129  
00 (default)  
01  
10  
11  
0.8701  
0.8701  
0.7183  
0.7383  
0.5010  
0.5010  
Table 3-13. Luminance Brightness  
Subaddress 09h  
Default  
80h  
7
6
5
4
3
2
1
0
Brightness [7:0]  
Brightness [7:0]: This register works for CVBS and S-Video luminance. See subaddress 2Fh.  
0000 0000 = 0 (dark)  
1000 0000 = 128 (default)  
1111 1111 = 255 (bright)  
For composite and S-Video outputs, the output black level relative to the nominal black level (64 out of 1024) as a function of the  
Brightness[7:0] setting is as follows.  
Black Level = nominal_black_level + (MB + 1) × (Brightness[7:0] - 128)  
Where MB is the brightness multiplier setting in the Brightness and Contrast Range Extender register at I2C subaddress 2Fh.  
Table 3-14. Luminance Contrast  
Subaddress 0Ah  
Default  
80h  
7
6
5
4
3
2
1
0
Contrast [7:0]  
Contrast [7:0]: This register works for CVBS and S-Video luminance. See subaddress 2Fh.  
0000 0000 = 0 (minimum contrast)  
1000 0000 = 128 (default)  
1111 1111 = 255 (maximum contrast)  
For composite and S-Video outputs, the total luminance gain relative to the nominal luminance gain as a function of the Contrast [7:0]  
setting is as follows.  
Luminance Gain = (nominal_luminance_gain) × [Contrast[7:0] / 64 / (2^MC) + MC - 1]  
Where MC is the contrast multiplier setting in the Brightness and Contrast Range Extender register at I2C subaddress 2Fh.  
Copyright © 20052011, Texas Instruments Incorporated  
Internal Control Registers  
47  
Submit Documentation Feedback  
focus.ti.com: TVP5160