TPS40190
www.ti.com
SLUS658A–JULY 2005–REVISED AUGUST 2005
ORDERING INFORMATION
TA
PACKAGE
PART NUMBER(1)
TPS40190DRCR
TPS40190DRCT
-40°C to 85°C
Plastic DRC (SON)
(1) The TPS40190 is available taped and reeled only. Use large reel
device type R to order quantities of 3000 units per reel. Use small
reel device type T to order quantities of 250 per reel.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1)
TPS40190
–0.3 to 16.5
–5 to 22
UNIT
VDD
SW
V
BOOST-SW, HDRV-SW (differential from BOOST or HDRV to
SW)
VDD
Input voltage range
–0.3 to 6
COMP
–0.3 to 3
–0.3 to 6
FB, BP5, LDRV, ENABLE
TJ
Operating junction temperature range
Storage temperature
–40 to 125
–55 to 150
°C
Tstg
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
DISSIPATION RATINGS
(2)
PACKAGE
R
θJA High-K Board(1)
RθJC
(°C/W)
(°C/W)
DRC
47.9
14.1
(1) The JEDEC High-K (2s2p) board design used to derive this data was a 3-inch x 3-inch (7.5-cm x 7.5-cm), multilayer board with
one-ounce internal power and ground planes and two-ounce copper traces on top and bottom of the board.
(2) The junction-to-case impedance is measured from the die to the thermal pad on the device package.
RECOMMENDED OPERATING CONDITIIONS
MIN NOM
MAX
15
UNIT
V
VDD
TA
Input voltage
4.5
-40
Operating free-air temperature
85
°C
2