欢迎访问ic37.com |
会员登录 免费注册
发布采购

TMS320C6416TZLZ7 参数 Datasheet PDF下载

TMS320C6416TZLZ7图片预览
型号: TMS320C6416TZLZ7
PDF下载: 下载PDF文件 查看货源
内容描述: 定点数字信号处理器 [FIXED-POINT DIGITAL SIGNAL PROCESSORS]
分类和应用: 微控制器和处理器外围集成电路数字信号处理器时钟
文件页数/大小: 140 页 / 2016 K
品牌: TI [ TEXAS INSTRUMENTS ]
 浏览型号TMS320C6416TZLZ7的Datasheet PDF文件第51页浏览型号TMS320C6416TZLZ7的Datasheet PDF文件第52页浏览型号TMS320C6416TZLZ7的Datasheet PDF文件第53页浏览型号TMS320C6416TZLZ7的Datasheet PDF文件第54页浏览型号TMS320C6416TZLZ7的Datasheet PDF文件第56页浏览型号TMS320C6416TZLZ7的Datasheet PDF文件第57页浏览型号TMS320C6416TZLZ7的Datasheet PDF文件第58页浏览型号TMS320C6416TZLZ7的Datasheet PDF文件第59页  
ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢆꢇ ꢈ ꢉꢈ ꢀꢊ ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢆꢇ ꢈ ꢉꢋ ꢀꢊ ꢀ ꢁꢂ ꢃ ꢄꢅ ꢆꢇ ꢈꢉ ꢇꢀ  
ꢌ ꢍꢎ ꢏꢐꢑꢒꢓ ꢍ ꢔꢀ ꢐꢍ ꢕꢍ ꢀꢖꢗ ꢂꢍ ꢕ ꢔꢖꢗ ꢒꢘ ꢓ ꢆꢏ ꢂ ꢂꢓ ꢘ ꢂ  
SPRS226H − NOVEMBER 2003 − REVISED AUGUST 2005  
Terminal Functions (Continued)  
SIGNAL  
NAME  
IPD/  
IPU  
TYPE  
DESCRIPTION  
NO.  
UTOPIA SLAVE (ATM CONTROLLER) − RECEIVE INTERFACE (CONTINUED)  
URDATA7Ψ  
URDATA6Ψ  
URDATA5Ψ  
URDATA4Ψ  
URDATA3Ψ  
URDATA2Ψ  
URDATA1Ψ  
URDATA0Ψ  
AF12  
AE11  
AF13  
AC11  
AC12  
AE12  
AD14  
AD13  
8-bit Receive Data Bus.  
Using the Receive Data Bus, the UTOPIA Slave (on the rising edge of the URCLK) can receive  
the 8-bit ATM cell data from the Master ATM Controller.  
When the UTOPIA peripheral is disabled (UTOPIA_EN [BEA11 pin] = 0), these pins are tied-  
off.  
I
RESERVED FOR TEST  
G14  
H7  
N20  
P7  
RSV  
RSV  
Reserved. These pins must be connected directly to CV  
for proper device operation.  
DD  
Y13  
R6  
Reserved. This pin must be connected directly to DV  
DD  
for proper device operation.  
A3  
G2  
H3  
Reserved (leave unconnected, do not connect to power or ground. If the signal must be  
routed out from the device, the internal pull−up/down resistance should not be relied upon and  
an external pull−up/down should be used).  
J4  
RSV  
K6  
N3  
P3  
W25  
IPD  
I = Input, O = Output, Z = High impedance, S = Supply voltage, GND = Ground  
IPD = Internal pulldown, IPU = Internal pullup. (These IPD/IPU signal pins feature a 30-kIPD or IPU resistor. To pull up a signal to the opposite  
supply rail, a 1-kresistor should be used.)  
External pulldowns required: If UTOPIA is selected (BEA11 = 1) and these pins are connected to other devices, then a 10-kresistor must be  
used to externally pull down each of these pins. If these pins are “no connects”, then only UXCLK and URCLK need to be pulled down and other  
pulldowns are not necessary.  
ΨThe C6414T device does not support the UTOPIA peripheral; therefore, these standalone UTOPIA pins are Reserved (leave unconnected, do  
not connect to power or ground) with the exception of UXCLK and URCLK which should be connected to a 10-kpulldown resistor (see the  
square [] footnote).  
55  
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443  
 复制成功!