Quick Setup Guide
www.ti.com
+ LEFT SPEAKER OUTPUTS –
+ RIGHT SPEAKER OUTPUTS –
LOUT+
LOUT–
ROUT+
ROUT–
LEFT CHANNEL
OUTPUT FILTERS
RIGHT CHANNEL
OUTPUT FILTERS
HEATSINK
TAS5622
TAS5624
PVDD
MODE
PINS
TAS5538
PBTL – BTL
(+12 to
+36 Vdc)
NORMAL
S1
RESET
INPUT SIGNAL & CONTROL
INTERFACE (J1)
GND
Reset
LED
STATUS
LEDs
Figure 4. Physical Structure of the TAS5622-TAS5624DDVEVM (Approximate Layout)
2
Quick Setup Guide
This section describes the TAS5622-TAS5624DDVEVM power supplies and system interfaces. It provides
information regarding handling and unpacking, absolute operating conditions, and switch and jumper
positions. It also provides a step-by-step guide to setting up the TAS5622-TAS5624DDVEVM for device
evaluation.
2.1 Electrostatic Discharge Warning
Many of the components of the TAS5622-TAS5624DDVEVM are susceptible to damage by electrostatic
discharge (ESD). Customers are advised to observe proper ESD handling precautions when unpacking
and handling the EVM, including the use of a grounded wrist strap at an approved ESD workstation.
6
TAS5622-TAS5624DDVEVM
SLAU376–May 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
