MSP430F41x2
MIXED SIGNAL MICROCONTROLLER
SLAS648E -- APRIL 2009 -- REVISED MARCH 2011
electrical characteristics over recommended operating free-air temperature (unless otherwise
noted)
crystal oscillator, LFXT1, high frequency modes
PARAMETER
TEST CONDITIONS
Ceramic resonator
V
MIN
0.45
1
TYP
MAX UNIT
CC
1.8 V to 3.6 V
1.8 V to 3.6 V
6
f
LFXT1 oscillator crystal frequency
MHz
6
LFXT1
Crystal resonator
Integrated effective load capacitance,
HF mode (see Note 1)
C
L,eff
See Note 2
1
pF
Duty cycle
Measured at P1.6/ACLK
2.2 V/3 V
40
50
60
%
NOTES: 1. Includes parasitic bond and package capacitance (approximately 2 pF per pin).
Since the PCB adds additional capacitance it is recommended to verify the correct load by measuring the ACLK frequency. For a
correct setup the effective load capacitance should always match the specification of the used crystal.
2. Requires external capacitors at both terminals. Values are specified by crystal manufacturers.
internal very low power, low-frequency oscillator (VLO)
PARAMETER
VLO frequency
TEST CONDITIONS
= --40C to 85C
A
V
MIN
TYP
12
MAX UNIT
CC
f
T
2.2 V/3 V
2.2 V/3 V
4
20
kHz
%/C
%/V
VLO
df
df
/dT
/dV
VLO frequency temperature drift
VLO frequency supply voltage drift
See Note
0.5
4
VLO
VLO
See Note 2
1.8V to 3.6V
CC
NOTES: 1. Calculated using the box method:
I Version: (MAX(--40_C to 85_C) -- MIN(--40_C to 85_C))/MIN(--40_C to 85_C)/(85_C -- (--40_C))
2. Calculated using the box method: (MAX(1.8 V to 3.6 V) -- MIN(1.8 V to 3.6 V))/MIN(1.8 V to 3.6 V)/(3.6 V -- 1.8 V)
RAM
PARAMETER
TEST CONDITIONS
CPU halted
MIN
MAX
UNIT
VRAMh
See Note 1
1.6
V
NOTE 1: This parameter defines the minimum supply voltage when the data in program memory RAM remain unchanged. No program execution
should take place during this supply voltage condition.
36
POST OFFICE BOX 655303 DALLAS, TEXAS 75265