CC2510Fx / CC2511Fx
The high speed crystal oscillator must
be used when the radio is active.
• 2-FSK, GFSK and MSK supported
• Optional automatic whitening and de-
• Clock source for ultra-low power
operation can be either a low-power RC
oscillator or an optional 32.768 kHz
crystal oscillator
whitening of data
• Programmable Carrier Sense (CS)
indicator
• Programmable
Preamble
Quality
• Very fast transition to active mode from
power modes enables ultra low average
power consumption in low duty-cycle
systems
Indicator for detecting preambles and
improved protection against sync word
detection in random noise
• Support for automatic Clear Channel
Assessment (CCA) before transmitting
(for listen-before-talk systems
2.8 2.4 GHz Radio with Baseband Modem
• Based on the industry leading CC2500
• Support for per-package Link Quality
radio core
Indication (LQI)
• Few external components: On-chip
frequency synthesizer, no external filters
or RF switch needed
• Suited for systems targeting compliance
with EN 300 328, EN 300 440, FCC
CFR47 Part 15 and ARIB STD-T-66
• Flexible support for packet oriented
systems: On-chip support for sync word
detection, address check, flexible
packet length, and automatic CRC
handling
• When transmitting in band 2480 -
2483.5 MHz under FCC, duty-cycling or
reducing output power might be needed
• Supports use of DMA for both RX and
TX
resulting
in
minimal
CPU
intervention even on high data rates
• Programmable channel filter bandwidth
SWRS055F
Page 7 of 241
TI [ TEXAS INSTRUMENTS ]
