SLUS606N – JUNE 2004 – REVISED NOVEMBER 2008
..................................................................................................................................................
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
(1)
T
J
CHARGE REGULATION VOLTAGE (V)
4.2 V
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
(Blinking status pins)
–40°C to 125°C
Externally programmable (2.1 V to 15.5 V)
4.2 V (Blinking status pins)
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
Externally programmable (2.1 V to 15.5 V)
(1)
(2)
(3)
INTENDED APPLICATION
Stand-alone
Stand-alone
Stand-alone
Stand-alone
Stand-alone
Stand-alone
System-controlled
System-controlled
System-controlled
PART NUMBER
(2) (3)
bq24100RHLR
bq24100RHLT
bq24103RHLR
bq24103RHLT
bq24103ARHLR
bq24103ARHLT
bq24104RHLR
bq24104RHLT
bq24105RHLR
bq24105RHLT
bq24108RHLR
bq24109RHLR
bq24113RHLR
bq24113RHLT
bq24113ARHLR
bq24113ARHLT
bq24115RHLR
bq24115RHLT
MARKINGS
CIA
CIA
CID
CID
CKO
CKO
NXW
NXW
CIF
CIF
CIU
CDY
CIJ
CIJ
CKF
CKF
CIL
CIL
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
Web site at
The RHL package is available in the following options:
T
– taped and reeled in quantities of 250 devices per reel
R
– taped and reeled in quantities of 3000 devices per reel
This product is RoHS-compatible, including a lead concentration that does not exceed 0.1% of total product weight, and is suitable for
use in specified lead-free soldering processes.
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range (unless otherwise noted)
UNIT
Supply voltage range (with respect to V
SS
)
IN, VCC
STAT1, STAT2, PG, CE, CELLS, SNS, BAT
OUT
Input voltage range (with respect to V
SS
and PGND)
CMODE, TS, TTC
VTSB
ISET1, ISET2
Voltage difference between SNS and BAT inputs (V
SNS
– V
BAT
)
Output sink
Output current (average)
T
A
T
J
T
stg
Operating free-air temperature range
Junction temperature range
Storage temperature
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
(1)
STAT1, STAT2, PG
OUT
20 V
–0.3 V to 20 V
–0.7 V to 20 V
7V
3.6 V
3.3 V
±1 V
10 mA
2.2 A
–40°C to 85°C
–40°C to 125°C
–65°C to 150°C
300°C
Stresses beyond those listed under
absolute maximum ratings
may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under
recommended operating
conditions
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2
Copyright © 2004–2008, Texas Instruments Incorporated
Product Folder Link(s):
TI [ TEXAS INSTRUMENTS ]
