73S8024RN Data Sheet
DS_8024RN_020
12 Electrical Specification
12.1 Absolute Maximum Ratings
Operation outside these rating limits may cause permanent damage to the device. The smart card
interface pins are protected against short circuits to VCC, ground, and each other.
Parameter
Rating
Supply Voltage VDD
-0.5 to 6.0 VDC
Supply Voltage VPC
-0.5 to 6.0 VDC
-0.3 to (VDD +0.5) VDC
-60 to 150°C
Input Voltage for Digital Inputs
Storage Temperature
Pin Voltage (except card interface)
Pin Voltage (card interface)
-0.3 to (VDD +0.5) VDC
-0.3 to (VCC + 0.5) VDC
+/- 6kV
ESD Tolerance – Card interface pins
ESD Tolerance – Other pins
+/- 2kV
*Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.
Note: Smart Card pins are protected against shorts between any combinations of Smart Card pins.
12.2 Recommended Operating Conditions
Parameter
Rating
Supply Voltage VDD
2.7 to 5.5 VDC
4.75 to 5.5 VDC
4.85 to 5.5 VDC
-40°C to +85°C
0V to VDD + 0.3V
Supply Voltage VPC
NDS Supply Voltage VPC
Ambient Operating Temperature
Input Voltage for Digital Inputs
12.3 Package Thermal Parameters
Package
28 SO
Rating
44 °C / W
32QFN
47 °C / W (with bottom pad soldered)
78 °C / W (without bottom pad soldered)
53 °C / W (with the bottom pad soldered)
90 °C / W (without the bottom pad soldered)
32QFN
20QFN
20QFN
16
Rev. 1.8
TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
