73S8009C Data Sheet
DS_8009C_025
2 Electrical Specifications
This section provides the following:
.
.
.
.
.
.
Absolute maximum ratings
Recommended operating conditions
Smart card interface requirements
Digital signals characteristics
Voltage / temperature fault detection circuits
Thermal characteristics
2.1 Absolute Maximum Ratings
Table 2 lists the maximum operating conditions for the 73S8009C. Permanent device damage may occur
if absolute maximum ratings are exceeded. Exposure to the extremes of the absolute maximum rating for
extended periods may affect device reliability. The smart card interface pins are protected against short
circuits to VCC, ground, and each other.
Table 2: Absolute Maximum Device Ratings
Parameter
Rating
Supply Voltage VBUS
Supply Voltage VBAT
Supply Voltage VPC
VDD
-0.5 to 6.6 VDC
-0.5 to 6.6 VDC
-0.5 to 6.6 VDC
-0.5 to 4.0 VDC
-0.3 to (VDD +0.5) VDC
-60 to 150°C
Input Voltage for Digital Inputs
Storage Temperature
Pin Voltage (except card interface)
Pin Voltage (card interface)
Pin Voltage, LIN pin
-0.3 to (VDD + 0.5) VDC
-0.3 to (VCC + 0.3) VDC
0.3 to 6.5 VDC
ESD Tolerance – Card interface pins
+/- 6 kV
ESD Tolerance – Other pins
Pin Current, except LIN
Pin Current, LIN
+/- 2 kV
± 200 mA
+ 500 mA in, -200 mA out
Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.
Note: Smart Card pins are protected against shorts between any combinations of Smart Card pins.
10
Rev. 1.4
TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
