STANDARD MICROCIRCUIT DRAWING BULLETIN
DATE: 04-11-09
Approved sources of supply for SMD 5962-90731 are listed below for immediate acquisition information only and shall
be added to MIL-HDBK-103 and QML-38535 during the next revision. MIL-HDBK-103 and QML-38535 will be revised
to include the addition or deletion of sources. The vendors listed below have agreed to this drawing and a certificate
of compliance has been submitted to and accepted by DSCC-VA. This information bulletin is superseded by the next
dated revision of MIL-HDBK-103 and QML-38535. DSCC maintains an online database of all current sources of
supply at http://www.dscc.dla.mil/Programs/Smcr/.
Standard
microcircuit drawing
PIN 1/
Vendor
CAGE
Vendor
similar
PIN 2/
number
5962-9073101M2A
5962-9073101M2C
5962-9073101MEA
17856
1ES66
17856
1ES66
3/
DG411AZ/883
DG411AZ/883B
DG411AK/883
DG411AK/883B
DG411AL/883B
DG411AL/883B
DG412AZ/883
DG412AZ/883B
DG412AK/883
DG412AK/883B
DG412AL/883B
DG412AL/883B
DG413AZ/883
DG413AZ/883B
DG413AK/883
DG413AK/883B
DG413AL/883B
DG413AL/883B
5962-9073101MFA
5962-9073101MXC
5962-9073102M2A
5962-9073102M2C
5962-9073102MEA
1ES66
17856
1ES66
17856
1ES66
3/
5962-9073102MFA
5962-9073102MXC
5962-9073103M2A
5962-9073103M2C
5962-9073103MEA
1ES66
17856
1ES66
17856
1ES66
3/
5962-9073103MFA
5962-9073103MXC
1ES66
1/ The lead finish shown for each PIN representing
a hermetic package is the most readily available
from the manufacturer listed for that part. If the
desired lead finish is not listed contact the vendor
to determine its availability.
2/ Caution. Do not use this number for item
acquisition. Items acquired to this number may not
satisfy the performance requirements of this drawing.
3/ Not available from an approved source of supply.
1 of 2