SLOS488B – NOVEMBER 2006 – REVISED FEBRUARY 2008
www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range, T
A
= 25°C (unless otherwise noted)
VALUE / UNIT
Supply voltage, V
DD
V
I
Input voltage
Output continuous total power dissipation
T
A
T
J
T
stg
Operating free-air temperature range
Operating junction temperature range
Storage temperature range
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
ESD Protection
IEC Contact ESD Protection
(2)
Minimum Load Impedance
(1)
(2)
HBM Output Pins
HBM All Other Pins
No External Protection
V14MLA0603 Varistors Used for External Protection
RIGHTINx, LEFTINx
SD, SCL, SDA
–0.3 V to 6.0 V
–2.7 V to 3.6 V
–0.3 V to 7 V
See Dissipation Rating Table
–40°C to 85°C
–40°C to 125°C
–65°C to 150°C
260°C
8 kV
3.5 kV
8 kV
15 kV
12.8
Ω
Stresses beyond those listed under
absolute maximum ratings
may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under
recommended operating
conditions
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Tested to IEC 61000-4-2 standards on a TPA6130A2 EVM.
DISSIPATION RATINGS TABLE
PACKAGE
RTJ
YZH
(1)
(2)
T
A
≤
25°C
POWER RATING
4100 mW
970 mW
DERATING
FACTOR
(1) (2)
41 mW/°C
9.7 mW/°C
T
A
= 70°C
POWER RATING
2250 mW
530 mW
T
A
= 85°C
POWER RATING
1640 mW
390 mW
Derating factor measured with JEDEC High K board: 1S2P - One signal layer and two plane layers.
See JEDEC Standard 51-3 for Low-K board, JEDEC Standard 51-7 for High-K board, and JEDEC
Standard 51-12 for using package thermal information. Please see JEDEC document page for
downloadable copies:
AVAILABLE OPTIONS
T
A
–40°C to 85°C
PACKAGED DEVICES
(1)
20-pin, 4 mm
×
4 mm QFN
16-ball, 1,98 mm
×
1.98 mm
(+0,01mm, –0,09 mm)
PART NUMBER
TPA6130A2RTJ
(2)
SYMBOL
BSG
BRU
TPA6130A2YZH
(1)
(2)
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
Web site at
The RTJ package is only available taped and reeled. To order, add the suffix “R” to the end of the part number for a reel of 3000, or add
the suffix “T” to the end of the part number for a reel of 250 (e.g., TPA6130A2RTJR).
RECOMMENDED OPERATING CONDITIONS
MIN
Supply voltage, V
DD
V
IH
V
IL
T
A
High-level input voltage
Low-level input voltage
SCL, SDA, SD
SCL, SDA
SD
–40
2.5
1.3
0.6
0.35
85
MAX
5.5
UNIT
V
V
V
V
°C
Operating free-air temperature
4
Product Folder Link(s):
Copyright © 2006–2008, Texas Instruments Incorporated
TAOS [ TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS ]
