User's Guide
SNAU181A–June 2015–Revised June 2015
HDC1050EVM User 's Guide
1
Introduction
The Texas Instruments HDC1050EVM evaluation module (EVM) enables designers to evaluate the
operation and performance of the HDC1050 Relative Humidity and Temperature sensor.
The EVM contains one HDC1050 (See Table 1).
Table 1. Device and Package Configurations
DEVICE
IC
PACKAGE
U1
HDC1050
PWSON 6pin
The EVM hosts an MSP430F5528 microcontroller (µC) as well as the HDC1050. The µC is used to control
the HDC1050 and communicate with a host PC through a USB port. The EVM is designed to be broken
into two sections if desired. The sensor section can be separated from the µC section so that the user can
remotely locate the sensor from the µC section.
2
Setup
This section describes the connectors on the EVM as well and how to properly connect, set up and use
the HDC1050EVM.
Figure 1. HDC1050EVM
2
HDC1050EVM User 's Guide
SNAU181A–June 2015–Revised June 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
TAOS [ TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS ]
