■ RELIABILITY DATA
13. Resistance to Soldering
Appearance:
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q: Initial value
No abnormality
Standard
Insulation resistance: Initial value
Withstanding voltage（between terminals）: No abnormality
Temperature Compensating
（Class 1）
Appearance:
Capacitance change: Within ±2.5%
Q: Initial value
No abnormality
Specified
Value
High Frequency Type
Insulation resistance: Initial value
Withstanding voltage（between terminals）: No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%（BJ, B7, C6, C7）
Within ±20%（F）
Initial value
High Permittivity（Class 2）ꢁNote 1
Dissipation factor:
Insulation resistance: Initial value
Withstanding voltage（between terminals）: No abnormality
【Test Methods and Remarks】
Class 1
Class 2
105 Type
Arra（y 096, 110 Type）
None
105, 107, 212 Type
Arra（y 096, 110,212 Type）
Thermal treatment（at 150℃ for 1 hr）Note 2
042, 063 Type
042、063 Type
316, 325 Type
Preconditioning
Preheating
Preconditioning
Preheating
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min. 80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min. 150 to 200℃, 5 to 10 min.
Solder temp.
Duration
270±5℃
3±0.5 sec.
6 to 24 hrs（Standard condition）Note 5
Solder temp.
Duration
270±5℃
3±0.5 sec.
24±2 hrs（Standard condition）Note 5
ꢁ
Recovery
Recovery
14. Temperature Cycle (Thermal Shock）
Appearance:
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q: Initial value
No abnormality
Standard
Insulation resistance: Initial value
Withstanding voltage（between terminals）: No abnormality
Temperature Compensating
（Class 1）
Appearance:
Capacitance change: Within ±0.25pF
Q: Initial value
No abnormality
Specified
Value
High Frequency Type
Insulation resistance: Initial value
Withstanding voltage（between terminals）: No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%（BJ, B7, C6, C7）
Within ±20%（F）
Initial value
High Permittivity（Class 2）ꢁNote 1
Dissipation factor:
Insulation resistance: Initial value
Withstanding voltage（between terminals）: No abnormality
【Test Methods and Remarks】
Class 1
None
Class 2
Preconditioning
1 cycle
Thermal treatment（at 150℃ for 1 hr）Note 2
Step
Temperature（℃）
Lowest operating temperature ＋0/－3
Normal temperature
Time（min.）
30±3
2 to 3
1
2
3
4
Highest operating temperature ＋0/－3
Normal temperature
30±3
2 to 3
Number of cycles
Recovery
5 times
6 to 24 hrs（Standard condition）Note 5
24±2 hrs（Standard condition）Note 5
15. Humidity（Steady State）
Appearance:
No abnormality
Capacitance change: Within ±5% or ±0.5pF, whichever is larger.
Q： C＜10pF： Q≧200＋10Cꢁ
10≦C＜30pF： Q≧275＋2.5C
C≧30pF： Q≧350 （C：Nominal capacitance）
Insulation resistance: 1000 MΩ min.
Appearance: No abnormality
Standard
Temperature Compensating
（Class 1）
Specified
Value
High Frequency Type
Capacitance change: Within ±0.5pF,
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%（BJ, B7, C6, C7）
Within ±30%（F）
High Permittivity（Class 2）ꢁNote 1
Dissipation factor：
5.0% max.（BJ, B7, C6, C7）
11.0% max（. F）
Insulation resistance: 50 MΩμF or 1000 MΩ whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
40±2℃
High Frequency Type
All items
Thermal treatment（at 150℃ for 1 hr）ꢁNote 2
40±2℃
Preconditioning
Temperature
Humidity
None
Preconditioning
Temperature
Humidity
60±2℃
90 to 95％RH
90 to 95％RH
Duration
500＋24/ー0 hrs
Duration
500＋24/ー0 hrs
Recovery
6 to 24 hrs（Standard condition）Note 5
Recovery
24±2 hrs（Standard condition）Note 5
ꢁ
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
mlcc_reli-R3
TAIYO YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
