M24C16, M24C08, M24C04, M24C02, M24C01
DC AND AC PARAMETERS
This section summarizes the operating and mea-
surement conditions, and the DC and AC charac-
teristics of the device. The parameters in the DC
and AC Characteristic tables that follow are de-
rived from tests performed under the Measure-
ment Conditions summarized in the relevant
tables. Designers should check that the operating
conditions in their circuit match the measurement
conditions when relying on the quoted parame-
ters.
Table 6. Operating Conditions (M24Cxx-W)
Symbol
Parameter
Min.
2.5
Max.
5.5
Unit
V
V
Supply Voltage
CC
Ambient Operating Temperature (Device Grade 6)
Ambient Operating Temperature (Device Grade 3)
–40
–40
85
°C
°C
TA
125
Table 7. Operating Conditions (M24Cxx-R)
Symbol
Parameter
Min.
1.8
Max.
5.5
Unit
V
V
Supply Voltage
Ambient Operating Temperature
CC
TA
–40
85
°C
Table 8. DC Characteristics (M24Cxx-W, Device Grade 6)
Test Condition
(in addition to those in Table 6.)
Symbol
Parameter
Min.
Max.
Unit
Input Leakage Current
(SCL, SDA, E0, E1,and E2)
ILI
V
IN = VSS or VCC
± 2
µA
ILO
Output Leakage Current
V
OUT = VSS or VCC, SDA in Hi-Z
± 2
µA
mA
mA
µA
µA
V
V
CC=5V, f =400kHz (rise/fall time < 30ns)
2
1
c
ICC
Supply Current
VCC =2.5V, f =400kHz (rise/fall time < 30ns)
c
VIN = VSS or VCC , VCC = 5 V
1
ICC1
Stand-by Supply Current
V
IN = VSS or VCC , VCC = 2.5 V
0.5
0.3VCC
(1)
VIL
VIH
VOL
–0.45
Input Low Voltage
(1)
0.7VCC
VCC+1
0.4
V
V
Input High Voltage
Output Low Voltage
IOL = 2.1 mA, VCC = 2.5 V
Note: 1. The voltage source driving only E0, E1 and E2 inputs must provide an impedance of less than 1kOhm.
13/25