欢迎访问ic37.com |
会员登录 免费注册
发布采购

SST89E516RD2-40-C-NJE 参数 Datasheet PDF下载

SST89E516RD2-40-C-NJE图片预览
型号: SST89E516RD2-40-C-NJE
PDF下载: 下载PDF文件 查看货源
内容描述: FlashFlex MCU [FlashFlex MCU]
分类和应用: 外围集成电路微控制器PC时钟
文件页数/大小: 81 页 / 832 K
品牌: SST [ SILICON STORAGE TECHNOLOGY, INC ]
 浏览型号SST89E516RD2-40-C-NJE的Datasheet PDF文件第31页浏览型号SST89E516RD2-40-C-NJE的Datasheet PDF文件第32页浏览型号SST89E516RD2-40-C-NJE的Datasheet PDF文件第33页浏览型号SST89E516RD2-40-C-NJE的Datasheet PDF文件第34页浏览型号SST89E516RD2-40-C-NJE的Datasheet PDF文件第36页浏览型号SST89E516RD2-40-C-NJE的Datasheet PDF文件第37页浏览型号SST89E516RD2-40-C-NJE的Datasheet PDF文件第38页浏览型号SST89E516RD2-40-C-NJE的Datasheet PDF文件第39页  
FlashFlex MCU  
SST89E516RD2 / SST89E516RD  
SST89V516RD2 / SST89V516RD  
Data Sheet  
TABLE  
EA#  
4-2: IAP Address Resolution  
SFCF[1:0]  
00  
Address of IAP Inst.  
Target Address  
>= 2000H (Block 0)  
< 2000H (Block 1)  
Any (Block 0)  
Block Being Programmed  
1
1
1
1
1
0
0
0
>= 2000H (Block 0)  
>= 2000H (Block 0)  
< 2000H (Block 1)  
Any (Block 0)  
None1  
Block 1  
Block 0  
None1  
00  
00  
01, 10, 11  
01, 10, 11  
00  
>= 2000H (Block 0)  
< 2000H (Block 1)  
>= 2000H (Block 0)  
< 2000H (Block 1)  
Any (Block 0)  
Any (Block 0)  
Block 1  
Block 0  
Block 1  
From external  
00  
From external  
01, 10, 11  
From external  
Block 0  
T4-2.0 1273  
1. No operation is performed because code from one block may not program the same originating block  
4.2.4 In-Application Programming Mode  
Commands  
IAP Enable  
ORL SFCF, #40H  
All of the following commands can only be initiated in the  
IAP mode. In all situations, writing the control byte to the  
SFCM register will initiate all of the operations. All com-  
mands will not be enabled if the security locks are enabled  
on the selected memory block.  
Set-Up  
MOV SFDT, #55H  
The Program command is for programming new data into  
the memory array. The portion of the memory array to be  
programmed should be in the erased state, FFH. If the  
memory is not erased, it should first be erased with an  
appropriate Erase command. Warning: Do not attempt to  
write (program or erase) to a block that the code is cur-  
rently fetching from. This will cause unpredictable pro-  
gram behavior and may corrupt program data.  
Polling scheme  
MOV SFCM, #01H  
Interrupt scheme  
MOV SFCM, #81H  
SFST[2] indicates  
operation completion  
INT1 interrupt  
indicates completion  
1273 F05.0  
4.2.4.1 Chip-Erase  
The Chip-Erase command erases all bytes in both memory  
blocks. This command is only allowed when EA#=0 (exter-  
nal memory execution). Additionally this command is not  
permitted when the device is in level 4 locking. In all other  
instances, this command ignores the Security Lock status  
and will erase the security lock bits and re-map bits.  
©2007 Silicon Storage Technology, Inc.  
S71273-03-000  
1/07  
35  
 复制成功!