A d v a n c e I n f o r m a t i o n
Revision A+4 (May 13, 2004)
Global
Removed references to RTSOP.
Distinctive Characteristics
Removed 16-word/32-byte page read buffer from Performance Characteristics.
Changed Low power consumption to 25 mA typical active read current and re-
moved 10 mA typical intrapage active read current.
Ordering Information
Changed formatting of pages.
Changed model numbers from 00,01,02,03 to 01, 02, V1, V2.
Table 1, “Device Bus Operations”
Combined WP# and ACC columns.
Table 8, “CFI Query Identification String”, Table 9, “System Interface
String”, Table 10, “Device Geometry Definition”, and Table 11, “Primary
Vendor-Specific Extended Query
Added Address (x8) column.
Word Program Command Sequence
Added text to fourth paragraph.
Figure 1, “Write Buffer Programming Operation,”
Added note references and removed DQ15 and DQ13.
Figure 3, “Program Suspend/Program Resume,”
Changed field to read XXXh/B0h and XXXh/30h.
Password Protection Command Set Definitions
Replaced all text.
Table 12, “S29GL512N, S29GL256N, S29GL128N Command Definitions,
x16”
Changed the first cycle address of CFI Query to 55.
Table 13, “S29GL512N, S29GL256N, S29GL128N Command Definitions,
x8”
Changed the third cycle data Device ID to 90.
Removed Unlock Bypass Reset.
Removed Note 12 and 13.
Figure 5, “Data# Polling Algorithm,”
Removed DQ15 and DQ13.
Absoulte Maximum Ratings
Removed VCC from “All other pins” with respect to Ground.
CMOS Compatible
Changed the Max of ICC4 to 70 mA
Added VIL to the Test conditions of ICC5, ICC6, and ICC7
Change the Min of VIL to - 0.1 V.
Updated note 5.
Read-Only Operations–S29GL128N Only
Added tCEH parameter to table.
May 13, 2004 27631A4
S29GLxxxN MirrorBitTM Flash Family
109
SPANSION [ SPANSION ]
